Olympus DM-4 Anleitung Handbuch - Seite 9

Blättern Sie online oder laden Sie pdf Anleitung Handbuch für Sprachaufzeichnungsgerät Olympus DM-4 herunter. Olympus DM-4 33 Seiten. Dm-4 instructions (english, french, spanish)

Seite drucken

Inserting batteries (Fig. 1)

1 While pushing down on the

grooves using both thumbs, slide

the battery cover in the direction

indicated by the arrow.

2 With the back label of the battery

facing up, line up the terminals of

the recorder and battery. Insert the

battery by sliding in direction A

while pushing down in direction B.

3 Close the battery cover by sliding

all the way in direction B while

pushing down in direction A.

Charging using AC adapter

Lithium ion battery is self

discharging. After unpacking

this product, charge the supplied

lithium ion battery before using

the recorder for the first time.

1 Connect the AC adapter in to an AC

outlet.

2 Connect the AC adapter to the

recorder.

• Charging has started when LED

indicator light is orange and the

battery indicator on the display

changes to the charging indicator.

Turning on/off the power

Turning on the power (Fig. 1-4)

While the recorder is turned off, slide the

POWER/HOLD switch in the direction

indicated by the arrow for 2 seconds or

longer.

Turning off the power (Fig. 1-4)

Slide the POWER/HOLD switch in the

direction indicated by the arrow for 1

seconds or longer.

Auto Power off mode

If the recorder is on and stops for 10

minutes or longer (default setting),

the recorder enters Auto Power off

mode and turns off the power. You

can set the time to enter power save

mode from among [5minutes],

[10minutes], [30minutes], [1hour],

[2hour], [3hour] and [Off].

To exit Auto Power off mode , turn on

the power again.

Setting time and date

[Time & Date] (Fig. 3)

When you use this recorder for the

first time after purchasing, or when

you switch it on after removing the

batteries for more than 15 minutes

when exchanging batteries etc, the

[Set Time & Date] will appear. When

the "hour" is flashing, conduct the

setup from Step 2.

1 Select [Time & Date] from the

menu on the [System Menu].

2 Press the 9 or 0 button to

select the item to set.

3 Press the + or − button to set.

4 After the date and time have been

set, press the `OK button.

5 Press the F3 (HOME) button to

close the menu screen.

Inserting a microSD card (Fig. 2)

This recorder can be used with

commercially available microSD

cards as well as the built-in memory.

1 While the recorder is during stop

mode, open the card cover.

2 Face the microSD card the correct

way and insert it into the card slot

as shown in the diagram.

• Insert the microSD card keeping

it straight.

• Inserting the microSD card the

wrong way or at an angle could

damage the contact area or

cause the microSD card to jam.

• If the microSD card is not

inserted all the way, data may

not be written to the microSD

card.

3 Close the card cover securely.

• When you insert the microSD

card, the recording media

changeover display will appear.

4 When you are recording to a

microSD card, press the + or −

button and select [Yes].

5 Press the `OK button to complete

the setting.

Recording (Fig. 4)

Recording to a recording folder

(Fig. 4-

)

Before starting recording, select a voice

recording folder between [Folder A] to

[Folder E] in the [Recorder] folder.

These five folders can be selectively

us e d to dis tinguish the k in d of

recording.

1 Select the recording folder.

2 Press the REC button to start

recording.

• The LED indicator light glows

orange and [

] will appear on

the display.

• Turn the microphone in the

direction of the source to be

recorded.

a Recording mode

b Elapsed recording time

c Remaining recording time

d Level meter (change according

to the recording level and

recording function settings)

3 Press the STOP button to stop

recording.

e File length

Specifying a keyword before

recording (Fig. 4-

)

A keyword that matches the contents

to be recorded can be specified

before recording starts. This

function is very useful for classifying

recordings by keywords.

1 In the Folder list display, press F1

(SEARCH) to show the Keyword

search display.

2 Press the + or − button to specify

the desired keyword, and then

press the `OK or 9 button.

3 Press the REC button to start

recording.

4 Press the STOP button to stop

recording.

• Recorded files are automatically

tagged with the specified

keyword and managed using the

keyword list.