Olympus VN-5200PC Anweisungen
Blättern Sie online oder laden Sie pdf Anweisungen für Sprachaufzeichnungsgerät Olympus VN-5200PC herunter. Olympus VN-5200PC 2 Seiten. Enregistreur vocal numerique
Auch für Olympus VN-5200PC: Anleitung Handbuch (13 seiten), (Französisch) Mode D'emploi (13 seiten)
Seite drucken
Introduction
• The contents of this document may be changed in the future without advanced
DIGITAL VOICE RECORDER
notice. Contact our Customer Support Center for the latest information relating to
product names and model numbers.
VN-6200PC
• The utmost care has been taken to ensure the integrity of the contents of this
document. In the unlikely event that a questionable item, error, or omission is
found, please contact our Customer Support Center.
VN-5200PC
• Any liability for passive damages or damage of any kind occurred due to data loss
incurred by a defect of the product, repair performed by the third party other
VN-3200PC
than Olympus or an Olympus authorized service station, or any other reason is
excluded.
Trademarks and registered trademarks:
INSTRUCTIONS
EN
• Microsoft, Windows and Windows Media are registered
trademarks of Microsoft Corporation.
Thank you for purchasing an Olympus Digital Voice Recorder.
• Macintosh is the trademark of Apple Inc.
Please read these instructions for information
about using the product correctly and safely.
Other product and brand names mentioned herein may be
Keep the instructions handy for future reference.
the trademarks or registered trademarks of their respective
owners.
To ensure successful recordings, we recommend that
h S afe and Proper Usage
you test the record function and volume before use.
Before using your new recorder, read this manual carefully to ensure that you know how to operate
it safely and correctly. Keep this manual in an easily accessible location for future reference.
• The warning symbols indicate important safety related information. To protect yourself and others from
personal injury or damage to property, it is essential that you always read the warnings and information
provided.
Shinjuku Monolith, 3-1 Nishi-Shinjuku 2-chome, Shinjyuku-ku, Tokyo 163-0914, Japan. Tel. +81 (0)3-3340-2111
http://www.olympus.com
Getting Started
3500 Corporate Parkway, P.O. Box 610, Center Valley, PA 18034-0610, U.S.A. Tel. 1-888-553-4448
http://www.olympusamerica.com
h I dentification of Parts
1 Built-in Microphone
2 MIC (Microphone)
jack
3 HOLD switch
4 USB terminal
5 STOP (4) button
6 PLAY/OK (`)
button
7 0 (Rewind)
For customers in North and South America:
button
8 Battery cover
9 FOLDER/INDEX
Declaration of Conformity
button
Model Number:
VN-6200PC/VN-5200PC/VN-3200PC
Trade Name:
DIGITAL VOICE RECORDER
Responsible Party:
OLYMPUS IMAGING AMERICA INC.
Address:
3500 Corporate Parkway, P.O. Box 610, Center Valley,
PA 18034-0610,U.S.A.
Telephone Number: 1-888-553-4448
This device Complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Tested To Comply
With FCC Standards
Display (LCD panel):
FOR HOME OR OFFICE USE
Canadian RFI:
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital
apparatus as set out in the Radio Interference Regulations of the Canadian Department of
Communications.
Cet appareil numérique ne dépasse pas les limites de la Catégorie B pour les émissions de bruit
radio émanant d'appareils numériques, tel que prévu dans les Règlements sur l'Interférence
Radio du Département Canadien des Communications.
1 Folder indicator
1
2 [
] M icrophone sensitivity
2
indicator
1
3
[
] V ariable Control Voice
2
4
Actuator indicator
1
3
[
2
4
[K] F ast playback indicator
3
[J] S low playback indicator
4
U1-BS0175-03
-
-
AP0904
1
h I nserting Batteries
Replacing the Batteries:
When [N] appears on the display, replace the batteries as soon as possible. Size-AAA alkaline
batteries are recommended. When the batteries are depleted, [O] appears on the display, and
the recor-der shuts off.
• To replace the battery, make sure that you set the HOLD switch to the opposite direction of the
arrow before replacing.
h P ower Supply
0
0 EAR (Earphone)
1
jack
! Display (LCD panel)
2
@ Record/play
indicator light
# REC (s) button
$ + button
!
% 9 (Fast Forward)
3
button
^ – button
& DISP/MENU button
* ERASE (s) button
@
4
( Strap hole
#
5
$
hHold
6
%
Setting the HOLD switch to the direction of the arrow holds the current status, and all button
7
operations are disabled. Remember to release the HOLD switch to use the recorder.
^
&
8
h S etting Time and Date [Time & Date]
(
9
*
If you have set the time and date, information as to when a sound file was recorded is stored
• Strap is not supplied. Use
automatically with that file.
the optional accessory.
When you install batteries for the first time or each time you replace the batteries, the
"Month" indication will flash. In such a case, be sure to set the time and date by following
steps 4 through 6 described below.
5
1
1
1
2
6
3
7
4
3 Guide indicator
5
4 Character information display
Recording level meter
5
6
5 Battery indicator
7
6 Erase lock indicator
5
6
] R ecord mode indicator
7 Current file number
7
6
7
-
-
2
5 Press the + or – button to
set.
• Follow the same steps by press-
1 Lightly press down on the arrow and
ing the 9 or 0 button to
slide the battery cover open.
elect the next item, and press
the + or – button to set.
6 Press the PLAY/OK (`)
button to complete the
setup screen.
• The clock will start from the set
2 Insert two size-AAA alkaline batteries,
date and time.
• Press the PLAY/OK (`) button
observing the correct polarity.
according to the time signal.
7 Press the STOP (4) button to close the menu
mode.
• This completes the time and date setup procedure.
Notes:
• You can choose between 12 and 24 hour display by pressing the DISP/MENU button while setting
3 Close the battery cover completely.
the hour and minute.
• When the HOLD switch is set to the direction
• You can change the order of the date indication by pressing the DISP/MENU button while you
of the arrow, the display is turned off after
are setting the year, month, or day.
[HOLD] is displayed. Follow the next step
without regard to it.
An optional Ni-MH Rechargeable Battery (BR401)
Recording
from Olympus can be used for the recorder.
h N otes on the Folders
The recorder provides five folders, [F], [G], [H], [I] and [
1
change the folder selection, press the FOLDER/INDEX button while
2
the recorder is stopped.
Note:
3
• Up to a total of 200 files can be recorded in each folder.
4
Power on: Slide the HOLD switch in the direction
h R ecording
opposite that indicated by the arrow.
Power off: Slide the HOLD switch in the
1 Pre ss t he F O L D E R /
direction indicated by the arrow while the
INDEX button to select
recorder is not in operation.
the desired folder.
Standby Mode and Display Shut Off:
a Current folder
If the recorder is stopped for 5 minutes or longer during
recording or playing, it goes into Standby (power-save)
mode, and the display shuts off. To exit Standby mode
2 Press the REC (s) but-
and turn on the display, press any button.
ton to start recording.
• The record/play indicator light
turns red, and recording starts.
• If you start recording after in-
serting the earphone into the
earphone jack on the recorder,
you can hear the sound being
recorded. The sound volume
on the recording monitor can
be adjusted by pressing the +
or – button.
b Current recording mode
c Current file number
d Recording time
e Remaining recording time
f Recording level meter
3 Press the STOP (4) button to stop record-
1 Press and hold the DISP/MENU button for 1
ing.
second or longer to go to the main menu.
• New recordings are saved as the last file in the folder.
2 Press the 9 or 0
h T o Pause Recording
button to select
[Sub Menu].
To Pause:
3 Press the PLAY/OK (`)
5
Time & Date
1
button.
While the recorder is during
2
• [Time & Date] appears on the
recording mode, press the REC
6
display, and [
3
] flashes.
(s) button.
7
4
• [Rec Pause] appears on the display.
4 Press the 9 or 0
button to select the item
To Resume Recording:
to set.
• Select the item from "Month",
Press the REC (s) button again.
"Day", "Year", "Hour" and
1. 1'08 12:00 AM
• Recording will resume at the point of interruption.
"Minute" with a f lashing
point.
-
-
-
3
4
h L CD Display Information
You can select an option for the display of the recorder. This will help review and confirm different
recorder settings and file information.
1. 1'08 12:00 AM
State of the
Operation
Display
recorder
While in stop
Press and hold the
While holding the button down, "Remaining recording
mode
STOP (4) button
time" and "Remaining memory" are displayed.
While in record
Press the DISP/
Each press switches the display in the order
mode
MENU button
of "Recording elapsed time", "Remaining
7.25'08 3:00 PM
recording time" and "Recording level meter".
While in stop
Press the DISP/
Each press switches the display in the order of
mode or
MENU button
"Playback elapsed time", "Remaining playback
playback mode
time", "Date of recording" and "Time at
recording".
Playback
h P layback
1 Press the FOLDER/INDEX button to select
the desired folder.
Current folder
a
]. To
5
2 Press the 9 or 0 button to select the file
6
to playback.
7
3 Press the PLAY/OK (`)
a
button to start playback.
• The record/play indicator light
turns green, and the elapsed
playing time is indicated on
the display.
a Current file number
15m15s
14m15s
b Playing time
4 Press the + or – button to select the proper
sound volume.
• The display shows the volume level. You can choose between
[00] to [30].
15m15s
14m15s
h C anceling Playback
b
c
d
To Stop:
Remain 22h52m46s
Press the STOP (4) button.
• The recorder stops in the middle of the file being played.
e
To Resume Playback:
f
Press the PLAY/OK ( `) button again.
• Playback will resume at the point of interruption.
h F orwarding and Rewinding
Fast Forward:
While the recorder is during playback mode, press and
hold the 9 button.
• When you release the 9 button, the recorder will resume
normal playback.
Rewind:
Rec Pause
While the recorder is during playback mode, press and hold the 0 button.
• When you release the 0 button, the recorder will resume normal playback.
Notes:
• The recorder pauses when it reaches to the end of the file during fast forwarding or fast rewinding.
Pressing and holding it continues fast-forwarding or fast-rewinding.
• If there is an index mark or temp mark in the middle of the file, the recorder will stop at that
location.
-
-
-
5
h L ocating the Beginning of the File
While the recorder is during playback mode (playback
or playback in slow/fast mode), press the 9 or 0
button.
• Jumps to the beginning of the next file or the file being
played back.
Note:
• If there is an index mark or temp mark in the middle of the file, the recorder will stop at that
location.
h C hanging the Playback Speed
While the recorder is during playback mode, press the
PLAY/OK ( `) button to change the playback speed.
Slow Playback
Fast Playback
Normal speed
(-25%)
(+50%)
Notes:
• When the slow playback mode is selected, the [J] appears and, for the fast playback mode, [K]
appears on the display.
• Even if playback is stopped, the changed playback speed will be retained.
• The next playback will be at that speed.
Erase
You can easily erase unnecessary files. Sequential file numbers are reassigned automatically.
h E rasing One File at a Time
1 Press the FOLDER/INDEX button to select
15m15s
14m25s
folder.
a
b
a
2 Press the 9 or 0
button to select the file
to be erased.
a File to be erased
3 Press the ER ASE (
)
s
button.
4 Press the 9 button to select [Start].
5 Press the PLAY/OK (`) button.
Erase:
Start
File Erase!
h E rase All Files from a Folder
a
1 Pre ss t he F O L D E R /
INDEX button to select
the folder to be erased.
a Folder to be erased
2 Press the ER ASE (
)
s
button twice.
Erase:
Cancel
-
-
6