Axium AX-KPC 2.8 Schnellstart-Handbuch - Seite 2

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Touchscreen Axium AX-KPC 2.8 herunter. Axium AX-KPC 2.8 2 Seiten. Oled touchscreen

Seite drucken
Parts Guide
Chassis
OLED screen
Microphone
IR sensor
Learn switch
Installation
The KPC2.8 chassis mounts directly to the wall surface
The KPC2.8 chassis mounts directly to the wall surface
- Requires a standard single gang flush box for fixing.
a standard single gang flush box for fixing.
- Cut out the required hole in the wall above the flush box
Cut out the required hole in the wall above the flush box
- Terminate an RJ45 plug to the CAT5E cable
Terminate an RJ45 plug to the CAT5E cable – see wiring below
- Connect the RJ45 plug to the KPC2.8
- Secure the keypad in position using the supplied Flush
Secure the keypad in position using the supplied Flush-box screws
- Connect the USB lead to a PC running Axium keypad manager,
Connect the USB lead to a PC running Axium keypad manager,
Power the keypad via the CAT5E cable –
to either an Axium multi-zone amplifier, EX4X4
Program the keypad with the required keypad
- Clip the Cover plate into position.
Wiring
Use CAT5E 'home runs' with a maximum length of 300m.
Use CAT5E 'home runs' with a maximum length of 300m.
Terminate with a RJ45 plug. Use the standard 568
Pin
Wire Colour
Keypad function
Keypad function
1
White/Orange
+12V DC
2
Orange
0V
3
White/Green
IR output
IR output
4
Blue
A (RS485)
5
White/Blue
B (RS485) / Data
B (RS485) / Data
6
Green
0V
7
White/Brown
Balanced Mic-
8
Brown
Balanced Mic+
For U.S. models
FCC information for User
CAUTION:
The user changes or modifications not expressly approved by the party responsible for compliance could void
The user changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digit
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
harmful interference in a residential installation.
For Australia and New Zealand models
For Australia and New Zealand models
NOTE: THIS CLASS B DIGITAL APPARATUS COMPLIES WITH
THIS CLASS B DIGITAL APPARATUS COMPLIES WITH CISPR 22:2008
requires remote termination
EX4X4 or AX-R4, and
keypad configuration.
standard 568-B colour code:
RJ45 Socket
Cover Plate
USB socket
75mm (2.95")
45mm (1.77")
(1.77")