Olympus BX43 Anleitung Handbuch - Seite 6

Blättern Sie online oder laden Sie pdf Anleitung Handbuch für Mikroskop Olympus BX43 herunter. Olympus BX43 48 Seiten. System microscope

Safety Symbols

The following symbols are found on the microscope. Study the meaning of the symbols and always use the equipment

in the safest possible manner.

Symbol

Caution engraving/label

Caution engraving and label are placed at parts where special precaution is required when handling and using the

microscope. Always heed the cautions.

If a caution engraving or label is dirty or peeled off, contact Olympus for the replacement or other inquiry.

Getting Ready

Fig. 2

Indicates that the surface becomes hot, and should not be touched with bare hands.

Indicates a non-specific general hazard. Follow the description given after this symbol or in

instruction manual.

Indicates that the main switch is ON.

Indicates that the main switch is OFF.

Caution engraving

Halogen lamp socket

position

[Caution against high temperature]

Caution label

Rear panel

position

[Caution against high temperature]

1. A microscope is a precision instrument. Handle it with care and avoid

subjecting it to sudden or severe impact. Also note that the microscope

does not have a waterproof construction.

2. Do not use the microscope where it is subjected to direct sunlight, high

temperature and humidity, dust or vibrations. (For the operating conditions,

refer to section 8, "SPECIFICATIONS".)

3. When moving the microscope, remove the observation and specimen

and carefully carry the microscope by holding the grasping part on the

rear of the arm and the front part of the base as shown in Fig. 2.

CAUTION

· Even when moving the microscope along the desktop surface, be sure

to remove the specimen in advance.

· When the microscope needs to be packaged for forwarding to a remote

location, contact Olympus.

4. When the accessories of this product are used, make sure that the system

height does not exceed 1 meter. Otherwise, the stability of the device will

be lost.

Explanation

To prevent damage to the microscope, never hold it by the stage

or coarse/fine adjustment knob.