Olympus BX46 Anleitung Handbuch - Seite 27

Blättern Sie online oder laden Sie pdf Anleitung Handbuch für Mikroskop Olympus BX46 herunter. Olympus BX46 44 Seiten. Clinical microscope

5-6 Immersion Objectives

Be sure to use the provided Olympus Immersion oil.

CAUTION

Fig. 34

Using Immersion Objectives

1. Focus on the specimen with objectives in the order of lower-power to

higher-power ones.

2. Before engaging the immersion objective, place a drop of provided

immersion oil onto the specimen at the area to be observed.

3. Turn the revolving nosepiece to engage the immersion objective, then

focus using the fine adjustment knob.

Since air bubbles in the oil will affect the image quality, make

CAUTION

sure that the oil is free of bubbles.

a. To check for bubbles, remove the eyepiece and fully open the field and

aperture iris diaphragms, then look at the exit pupil of the objective inside

the observation tube. (The pupil should appear round and bright.)

b. To remove bubbles, turn the revolving nosepiece to repeatedly defocus

and refocus the oil immersion objective.

} If the condenser engraving shows a numerical aperture (NA) of 1.0 or

higher, the number applies only when oil is applied between the slide

glass and the top surface of the condenser. When oil is not present, the

NA is about 0.9.

4. After use, remove immersion oil from the objective front lens by wiping

with gauze slightly moistened with absolute alcohol.

Caution in use of immersion oil

CAUTION

If immersion oil enters your eyes or contacts with your skin, imme-

diately take the following treatment.

Eyes: Rinse with fresh water (for 15 minutes or more).

Skin: Rinse with water and soap.

If the appearance of the eyes or skin is altered or pain persists,

immediately see your doctor.

BX46

(Fig. 34)