Olympus BX61 Anleitung Handbuch - Seite 7

Blättern Sie online oder laden Sie pdf Anleitung Handbuch für Mikroskop Olympus BX61 herunter. Olympus BX61 40 Seiten. Motorized system microscopes

Seite drucken

Getting Ready

Fig. 3

Maintenance and Storage

1. To clean the lenses and other glass components, simply blow dirty away using a commercially available blower and

wipe gently using a piece of cleaning paper (or clean gauze).

If a lens is stained with fingerprints or oil smudges, wipe it gauze slightly moistened with commercially available absolute

alcohol.

!Since the absolute alcohol is highly flammable, it must be handled carefully.

Be sure to keep it away from open flames or potential sources of electrical sparks –– for example, electrical

equipment that is being switched on or off, which could cause ignition of a fire.

Also remember to always use it only in a well-ventilated room.

2. Do not attempt to use organic solvents to clean the microscope components other than the glass components. To clean

them, use a lint-free, soft cloth slightly moistened with a diluted neutral detergent.

3. Do not disassemble any part of the microscope as this could result in malfunction or reduced performance.

4. When not using the microscope, set the main switch to "

cover the microscope with a dust cover before storage.

5. When disposing of the microscope, check the regulations and rules of your local government and be sure to observe

them.

Caution

If the microscope is used in a manner not specified by this manual, the safety of the user may be imperiled. In addition,

the equipment may also be damaged. Always use the equipment as outlined in this instruction manual.

The warning, caution and other notes in this manual use the following symbols.

!: Indicates that failure to follow the instructions in the warning could result in bodily harm to the

user and/or damage to equipment (including objects in the vicinity of the equipment).

# : Indicates that failure to follow the instructions could result in damage to equipment.

} : Indicates commentary (for ease of operation and maintenance).

Intended use

This instrument has been designed to be used to observe magnified images of specimens in routine and research

applications. Do not use this instrument for any purpose other than its intended use.

1. A microscope is a precision instrument. Handle it with care and avoid

subjecting it to sudden or severe impact.

2. Do not use the microscope where it is subjected to direct sunlight, high

temperature and humidity, dust or vibrations. (For the operating condi-

tions, refer to chapter 5, "SPECIFICATIONS".)

3. When moving the microscope, remove the modules that may drop

including the specimen from the microscope in advance, hold it by the

hand hook on the rear and the base as shown on the left (Fig. 3) and

carry carefully (Weight: approx. 16 kg).

# Before transporting the microscope, be sure to remove the speci-

men, eyepieces and color glass filter so that they will not drop. Also

remove other modules attached to the microscope because they

increase the system weight.

# Damage to the microscope will occur if you grasp it by the stage,

focus adjustment knob or binocular section of the observation tube.

4. The BX61 series can be used with up to two intermediate attachments

including a U-CA magnification changer, U-EPA2 eyepoint adjuster, etc.

For restrictions when using two intermediate attachments, make sure to

read the instruction manuals provided with the respective intermediate

attachments.

" (OFF), wait until the lamp housing has cooled down, and

BX61