Olympus CX21LED Anleitung Handbuch - Seite 4

Blättern Sie online oder laden Sie pdf Anleitung Handbuch für Mikroskop Olympus CX21LED herunter. Olympus CX21LED 28 Seiten. Biological microscope

IMPORTANT

SAFETY PRECAUTIONS

LED (light emitting diode) safety warning

The LED built in this product is classified as Class 1 LED Product and is basically eye-safe. However, direct viewing the

light from the LED unit for extended time may cause damage to the eyes.

1. After the equipment has been used in an observation of a specimen that is accompanied with a potential of

infection, clean the parts coming in contact with the specimen to prevent infection.

· Moving this product is accompanied with the risk of dropping the specimen. Be sure to remove the specimen before

moving this product.

· In case the specimen is damaged by erroneous operation, promptly take the infection prevention measures.

2. Install the microscope on a sturdy, level table or bench.

3. Always use the AC adapter and power cord provided by Olympus. If no power cord is provided, please select the proper

power cord by referring to the section "PROPER SELECTION OF THE POWER SUPPLY CORD" at the end of this instruc-

tion manual. If the proper power cord is not used, product safety performance cannot be warranted.

4. Always ensure that the grounding terminal of the microscope and that of the wall outlet are properly connected. If the

equipment is not grounded, Olympus can no longer warrant the electrical safety performance of the equipment.

5. After operation or in case of abnormality, be sure to disconnect the power cord of the AC adapter from the connector on

the microscope or from the wall power outlet.

Safety Symbols

The following symbols are found on the microscope. Study the meaning of the symbols and always use the equipment

in the safest possible manner.

Symbol

Class 1 LED Product

Before use, carefully read the instruction manual. Improper use could result in personal injury to

the user and/or damage to the equipment.

Indicates that the main switch is ON.

Indicates that the main switch is OFF.

Explanation