Olympus SZH-STAD1 Anleitung Handbuch - Seite 9

Blättern Sie online oder laden Sie pdf Anleitung Handbuch für Mikroskop Olympus SZH-STAD1 herunter. Olympus SZH-STAD1 34 Seiten. Research stereomicroscope system

Seite drucken

Fig. 9

Fig. 10

Fig. 11

Fig. 12

Mounting the Eyepiece

1. Remove the eyepiece dust caps @ and loosen the eyepiece clamping

screws ² completely.

2. Gently insert the cross-lined eyepiece (CROSS WHS10X) ³ (if this is not

provided, use the WHS10X-H) into the right eyepiece sleeve until it stops.

3. Gently insert the eyepiece (WHS10X-H) into the left eyepiece sleeve until

it comes up against the stop.

4. Tighten both eyepiece clamping screws ².

Mounting (Removing) the Stage Plate

Place the stage plate (white, black on back side) into the mounting hole

on the base.

To remove, press the stage plate at the edge nearest to the pillar with

your fingertip. The opposite end will rise from the base so the stage plate

can be picked up easily.

Mounting the Specimen Holder

Insert the specimen holder @ into the 2 holes ² on the top surface of the

base.

Positioning the Microscope Body on the Stand

Loosen the focusing assembly clamping knob @. Slightly pivoting the

microscope body to the left and right, align the center of the objective

with the center of the stage plate ², then clamp the microscope body

with the focusing assembly clamping knob.

(Fig. 9)

(Fig. 10)

(Fig. 11)

(Fig. 12)