Axkid Babyfix Gebrauchsanweisung - Seite 5

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Autositz Axkid Babyfix herunter. Axkid Babyfix 8 Seiten. Baby seat approved according to group 0+ for babies weighing up to 13kg

Seite drucken

Buckle your child in the seat

Please make sure that belts are properly adjusted

to your child and that the belt are not twisted in

any way.

Put the baby seat on a plane surface

and then adjust the handle so that it is

according to picture 1 on the previous

page. Hold down the button for belt

adjustment (Pic 6, B) and at the same

time pull the shoulder belt (Pic 6, A)

until it is fully pulled out.

Then fold away the shoulder belts so

that they will be easy to get hold of

after you have placed your child in the

baby seat. If your child is older then 2

months of age the insert cushion shall

be removed (Pic 6, D).

Now place your child in the baby seat.

Make sure that the shoulder belts run

over your child's shoulders. When this

is done put the two shoulder belt's

locks together and put them in to the

belt buckle (Pic 7).

The belt locks only fit together in one

way. Make sure that the belt is secured

(Pic 8). Belts should then be tightened

by pulling belt strap (Pic 6, C).

Important!

When adjusting the shoulder belts on

the child seat it is important that you

have the child seat on a plane surface.

The reason for this is that the child's

position could be very different if the

seat is angled which may cause that the

belt is not tightened enough.