Olympus PER-E02 Gebrauchsanweisung - Seite 6

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Kamera-Zubehör Olympus PER-E02 herunter. Olympus PER-E02 10 Seiten. Underwater extension ring for pt-e series

Seite drucken

Loading the Camera and Lens

After installing the lens on the camera, insert these into the PT-E series case on which the PER-E02 and

the PPO-E04 lens port are mounted.

Screw the camera table provided with the PT-E

series case firmly into the bottom of the cam-

era.

Mode dial knob

Zoom dial

Camera table lock lever

Lift the PT- E series case's power switch dial,

mode dial knob and zoom dial, and turn the

case's camera table lock lever counterclock-

wise to release the lock. Refer to the PT-E

series case's instruction manual for instructions

of how to attach the hot shoe cable for the

flash.

Power switch dial

E-5

Remove the eyecup from the camera's viewfind-

er. If a lens cap or filter is attached to the lens or

the strap is attached to the camera, remove them

as well.

Confirm that the camera's power switch is OFF.

While pulling out the zoom dial on the PT-E

series case, slide the camera table with camera

attached as far as it will go into the camera

table mount on the inner side of the case's front

lid.

Pull out the zoom

dial further.