Olympus PT-030 Gebrauchsanweisung - Seite 23

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Kamera-Zubehör Olympus PT-030 herunter. Olympus PT-030 44 Seiten. Underwater case

Check the camera operation.

After sealing the Case, check that the camera functions normally.

Push the POWER button on the Case and confirm that the camera

turns ON/OFF.

Turn the mode dial knob on the Case and confirm that the camera

mode switches properly.

Push the shutter lever on the Case and confirm that the camera

shutter is released.

Operate other control buttons on the Case and confirm that the

camera functions as it should.

POWER

CAUTION

: • If the camera does not function properly, restart the digital

camera installation procedure from "Check the digital

camera." on page E-18 of this manual.

• Make sure that the mode dial can be moved after the

camera has been loaded in the Case. If the mode dial

does not move, there may be oil or grease on it; wipe it

clean.

• When the digital camera is not used for about 3 minutes

while in the shooting mode, it enters the sleep mode

(standby status) and no operations are possible. To cancel

sleep mode and return to operation status, press the zoom

lever, shutter button or any other button. For details, refer to

the digital camera's instruction manual.

Mode

Shutter

E-22

Zoom