Olympus PT-037 Gebrauchsanweisung - Seite 6

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Kamera-Zubehör Olympus PT-037 herunter. Olympus PT-037 43 Seiten. Underwater case

5 Apply the specified silicone O-ring grease to the O-ring.

6 The waterproof function is not effective when the O-ring is not installed

correctly. When installing the O-ring, take care that it does not project from

the groove and that it is not twisted. Also, when sealing the Case, close the

lid after confirming that the O-ring has not come out of the groove.

7 This product is an airtight construction made of plastic (polycarbonate).

When it is left for a long time in a car, on a boat, at the beach, or at other

places reaching a high temperature, or when it is subjected for a long

time to uneven external force, it may be deformed and the waterproof

function may be lost. Pay sufficient attention to temperature control.

Also do not place heavy objects onto the product during storage or

transport, and avoid unreasonable storage.

8 When the O-ring contact surface is pressed strongly from the outside of

the Case, or when the Case is twisted, the waterproof function may be

lost. Take care not to exert excessive force.

9 Please use the Case only after performing the advance test and the final

check.

0 If you should notice drops of water or other signs of water leakage while

taking pictures, immediately stop the dive, remove any water from the

camera and the product, test according to the item "Final check", and

confirm whether leakage has occurred or not.

Handling the Product

Use or storage of the product at the following locations may cause

defective operation, defects, trouble, damage, fire, internal clouding, or

water leakage. This should be avoided.

• Locations reaching high temperatures such as those under direct

sunlight, in an automobile, etc.

• Locations with open fire

• Water depths in excess of 40 m

• Locations subject to vibrations

• Locations with high temperature and humidity or with severe

temperature changes

• Locations with volatile substances

This product is made of polycarbonate resin with excellent impact

resistance, but it may be damaged by scraping against rocks etc. It also

may break when it hits hard objects or is dropped.

This product is not a case to soften impacts to the camera inside the

product. When this product with a digital camera inside it is subjected to

EN 6