Olympus K-402 Kurzreferenz-Handbuch

Blättern Sie online oder laden Sie pdf Kurzreferenz-Handbuch für Medizinische Ausrüstung Olympus K-402 herunter. Olympus K-402 2 Seiten.

GuideSheath Kit 2 Quick Reference Guide
Single Use Guide Sheath Kit
K-401/402/403/404
Below are important steps for handling the GuideSheath Kit 2. For detailed operating instructions, be sure to
follow the instruction manual included in the device package.
1 Types of Stoppers
The GuideSheath Kit 2 comes with two types of stoppers – one for an ultrasonic probe and one for EndoTherapy
accessories.
Model
Compatible channel diameter
ET stopper
US stopper
2 Operation of ET/US Stoppers
<Preparation of US Stopper>
Insert the ultrasonic probe into the guide sheath's
1
accessory port so that the probe tip protrudes
slightly from the guide sheath tip. Attach the US
stopper to the ultrasonic probe by inserting the
probe to the end of the slit.
Note:
Make sure the ultrasonic probe
reaches the end of the slit on
the stopper.
Push the US stopper
2
connection portion
into the guide sheath's
accessory port to
secure it.
K-401
2.0 mm or more
4 pieces
(White)
1 piece
(Gray)
US stopper
3
Accessory port
K-402
K-403
3 pieces
4 pieces
(White)
(3: Gray / 1: White)
Adjust the position of the
US stopper so that the
probe tip protrudes slightly
from the guide sheath tip.
Remove the US stopper
from the guide sheath's
accessory port while
attaching the US stopper
to the ultrasonic probe.
K-404
2.8 mm or more
3 pieces
(2: Gray / 1: White)
1 piece
(Gray)