Olympus OEP-5 Anleitung Handbuch - Seite 26

Blättern Sie online oder laden Sie pdf Anleitung Handbuch für Medizinische Ausrüstung Olympus OEP-5 herunter. Olympus OEP-5 40 Seiten. Color video printer

Seite drucken

4.2 Control from the

Connected

Equipment

This document, "INSTRUCTIONS (BASIC)," explains

the use of the EVIS EXERA II video system center (CV-

180) with this instrument.

Refer to "INSTRUCTIONS (ADVANCED)" when you

use equipment other than the equipment introduced in

"INSTRUCTIONS (BASIC)" or when you attempt to

control this instrument from the panel or the remote

control unit (MAJ-898) (optional).

CAUTION

• When this instrument is controlled from the EVIS

EXERA II video system center (CV-180), do not

perform the following tasks from this instrument or

remote control unit (MAJ-898) (optional).

– Setting up the print quantity

– Setting up the number of multi-pictures

– Changing memory page

– Clearing a captured image

– Moving the pointer

Because of the difference between settings of the

EVIS EXERA II video system center (CV-180) and

settings of this instrument, desired operation may not

be carried out, or image data may disappear.

• The number of multi-picture images cannot be set to

"8" or "16."

• Do not set the number of multi-picture images to "8"

or "16" from EVIS EXERA II video system center

(CV-180). If it is set as "8" or "16," it will be set as "1."

• Do not turn OFF or take out the paper tray while

printing is in progress. Otherwise, paper jam and/or

malfunction may result.

• Do not open the front door or take out the paper tray

while printing is in progress. Otherwise, paper jam

and/or malfunction may result.

• Do not leave 10 or more print sheets on the paper exit.

Otherwise, paper jam may result. Also, even when the

number of print sheets is less than 10, message

"REMOVE PRINTS" may be displayed on the

monitor and LCD panel and printing is interrupted

depending on the print sheet conditions. If this occurs,

remove the print sheets from the paper exit. Printing

will resume automatically.

• If you turn this instrument OFF while the PRINT lamp

is lit, the ink ribbon quantity displayed on the

remaining ink ribbon display on the LCD panel and/or

the monitor may not match the actual ink ribbon

quantity remaining.

Be sure to turn this instrument OFF after the printing

is completed and the PRINT lamp turns off.

4.2 Control from the Connected Equipment

NOTES

• Refer to the instruction manuals supplied with the

connected equipment.

• If print sheets jam during printing, take the

measures recommended in to "4.3 In the Case of

a Paper Jam" on page 27.

• An image cannot be stored in a memory page that

is currently printing, or is reserved for printing.

Wait until the printing completes.

• If you open the front door during printing,

printing is interrupted. If you close the front door,

the print sheet being printed is ejected. To print

again, press the "PRINT" button.

• If the remaining print sheets in the paper tray

decreases, a rattling sound may be heard during

printing. This is not a malfunction.

• Depending on the environment in which this

instrument is used, or the condition of the print

sheets, printed sheets output from the paper exit

may go over the stopper and drop from the paper

exit. Printed sheets may slide between previously

ejected print sheets, and may not stack up in

printed order.

Set up the connected equipment as shown in Table

3.1 in "3.3 Setup of Connected Equipment" on page

20.

Set up the color video printer (OEP-5) according to

the connected equipment as described in "3.5 Setup

of This Instrument" on page 22.

Control as described in the instruction manuals for

the connected equipment (see Table 4.1).

Table 4.1

connected

The part indicated to the

equipment

instructions manual

CV-180

"5.5 Printing images"