Olympus CKX41 Anleitung Handbuch - Seite 5
Blättern Sie online oder laden Sie pdf Anleitung Handbuch für Laborausrüstung Olympus CKX41 herunter. Olympus CKX41 36 Seiten. Reflected fluorescence system
Auch für Olympus CKX41: Übersicht (7 seiten), Broschüre & Specs (4 seiten), Reparatur-Handbuch (43 seiten)
Seite drucken
- 1. Table of Contents
- 1. General Precautions for Observation
- 1. Using the Controls
- 2. Important
- 2. Applicable Fluorescence Objectives
- 3. Nomenclature
- 3. Centering the Mercury Burner
- 4. Troubleshooting Guide
- 4. Specifications
- 4. Assembly
- 4. Assembly
- 4. U-Excitation Filter Set Ckx-Nu (Optional)
- 4. Controls of each Module
- 4. Switching the Filter Slider
- 5. Proper Selection of the Power Supply Cord
- 5. Summary of Reflected Fluorescence Observation Procedure
Safety Symbols
The following symbols are found on the system. Study the meaning of the symbols and always use the
equipment in the safest possible manner.
Symbol
I
\
Warning Indications
Warning indications are placed at parts where special precaution is required when handling and using
the system. Always heed the warnings.
Warning indication position
1
Getting Ready
1. The system is composed of precision instruments. Handle it with care and avoid subjecting it to sudden
or severe impact.
2. Do not use the system where it is subjected to direct sunlight, high temperature and humidity, dust or
vibrations. (For the operating conditions, see chapter 6, "SPECIFICATIONS".)
3. Make certain that the burner is installed correctly and that all cords are correctly connected.
4. The stopper mechanisms provided for the functions indicate the limits of motion. To prevent damage,
do not apply excessive force to these limiting mechanisms.
5. Flare may be observed in fluorescence observation using cooled CCD. This flare can be reduced by
inserting a filter, which is available on custom order, in the fluorescence illumination tube. (Please
contact Olympus.)
Indicates that the surface becomes hot, and should not be touched with
bare hands.
Before use, carefully read the instruction manual. Improper use could result
in personal injury to the user and/or damage to the equipment.
Indicates a potential fire hazard; when replacing fuses, be sure that the
replacement fuses are of the specified rating.
Indicates that the main switch is ON.
Indicates that the main switch is OFF.
Lamp housing
U-LH50HG
REFLECTED FLUORESCENCE SYSTEM
Explanation
[Warning against high temperature]
FOR CKX41
2