Olympus SZX2-ILLC10 Anleitung Handbuch - Seite 9

Blättern Sie online oder laden Sie pdf Anleitung Handbuch für Laborausrüstung Olympus SZX2-ILLC10 herunter. Olympus SZX2-ILLC10 16 Seiten. Coaxial vertical illuminators

Seite drucken

Fig. 1

Fig. 2

Mounting the Coaxial Vertical Illuminator

1. Loosen the observation tube clamping screw @ with the provided Allen

screwdriver and remove the observation tube.

2. Align the positioning groove ² on the coaxial vertical illuminator with the

positioning pin ³ on the microscope body. Then insert the dovetail | at

the bottom of the coaxial vertical illuminator into the dovetail mount 5 on

the microscope body.

# The coaxial vertical illuminator can also be mounted in the opposite

orientation to that shown in Fig. 1. However this orientation is not

recommended because it makes observation difficult.

3. Tighten the observation tube clamping screw @ on the microscope body

with the Allen screwdriver.

4. Mount the observation tube on the coaxial vertical illuminator.

Mounting the Branched Flexible Light Guide

1. Loosen the clamping knob 1 on the light source unit. While positioning

the incident light guide end 2 of the light guide so that the notch faces

upward, insert it into the light guide mount ³ until the light guide grip 4

touches the mount. Then tighten the clamping knob @.

SZX2-ILLC16/ILLC10

(Fig. 1)

(Figs. 2 & 3)