Olympus U-DO3 Anleitung Handbuch - Seite 25

Blättern Sie online oder laden Sie pdf Anleitung Handbuch für Laborausrüstung Olympus U-DO3 herunter. Olympus U-DO3 40 Seiten. For 2, 5, 9, 10 and 13 persons
Auch für Olympus U-DO3: Anleitung Handbuch (18 seiten)

Seite drucken

Adjusting the stand height

Adjustment order

Adjust the stand height in the following order.

Look through the eyepieces at the main observer position

display the pointer using the pointer color switching lever a . Use the

pointer control lever b to move the pointer to the center of the field of

view. (For detailed operating procedures of the pointer color switching

lever and the pointer control lever, see "3-3 Pointer operation" (page 13).)

Look through the eyepieces at the assistant observer position

there is a deviation in the displayed pointer position, adjust the stand

height with the stand height lock knob c so that the pointer comes

to the center of the field of view.

Be sure to adjust the stand height.

TIP

If the stand height is not adjusted, following phenomena may

appear.

· The periphery areas of the field of view of the assistant

· The deviation in the field of view occurs between the main

· The field of view of the assistant observer is colored.

The farther away from the center of the system you apply

NOTE

the force to the observation tube, the larger the force to be

applied to the entire system becomes. Do not apply the

excess force on the observation tube carelessly.

Assistant

observer

Main

observer

observer are cut off.

observer and the assistant observer.

Assistant

observer

and

. If