Olympus U-UCD8 Anleitung Handbuch - Seite 36

Blättern Sie online oder laden Sie pdf Anleitung Handbuch für Laborausrüstung Olympus U-UCD8 herunter. Olympus U-UCD8 40 Seiten. Universal condenser

5-5 Indication Using Number Stickers

# To improve the adhesive strength of the number sticker attaching grooves, remove stain and oil

using the ether-alcohol mixture.

3 3

Fig. 14

Fig. 15

1. Fig. 14 shows the relationship between the number sticker

attaching grooves (1 to 8) and the turret.

Attach the number stickers to the designated grooves.

(Note 1) When the condenser is used with an IX/IX2 series

microscope, the condenser is attached upside down.

In consequence, the number stickers should also

be attached upside down.

(Note 2) When the condenser is used with the BX51WI,

attach the number stickers to as low positions as

possible of the turret.

2. Mount the optical elements as described in section 5-2 (pages

22 to 27).

The optical element indication plates should be attached

on the indication plate sheet @. (by means of magnetic

adsorption).

}Check the relationship between the optical element in the

light path and the number indicated by the number index

(guideline).

3. The indication plate sheet has double-side adhesive tape on

the backside. Remove the backing and attach the sheet to an

easily visible location.

(Examples) IX71/51 : Near the front panel.

BX51WI : Near the product name plate.

(Figs. 14 & 15)