Axmin UE-153DV1 Betriebshandbuch - Seite 10

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Säge Axmin UE-153DV1 herunter. Axmin UE-153DV1 18 Seiten. Small band saw machine

Seite drucken

Auto Cutting

Feed Rate by spring holding

Turn toggle switch to lower location. (Fig. 7)

Select spring as outer location. (Lower photo

Fig.8) Press green button down (Fig. 5) to start

auto cutting.

Toggle switch

For auto cutting

Manual Cutting

Feed Rate by Handle with Trigger

Switch

Turn toggle switch to upper location. (Fig. 7)

Select spring as inner location. Screw in from

outer to inner location for 50mm (upper photo

Fig. 8)

Push down the trigger switch in for cutting

material by handle. (Fig. 9)

Fig.7

Screw in

50mm

For manual cutting

Fig.8

Angle Cutting

The machine uses a swivel miter base for angle

cutting from 0~60 degree. On the sawing arm,

there is an attached angle scale (Q) in Fig.10.

This machine is preset zero degree before

leaving the factory. Angle cutting is adjusted as

follows.

Loosen handle (R) Fig.10 to release the

arm.

Move this swivel arm forward along the

scale to search a right index for the work to

be cut.

If the pointer matches the right index on the

scale. Tighten the handle, and a perfect

angle cut will be given.

Disconnect machine from the power source!

No matter when, where, or how. Pay extra

attention to the saw during it in transportation,

operation, and maintenance. Or adjustment.

Failure to comply may cause serious injury!

- 8 -

Trigger switch

Fig. 9

Fig. 10

WARNING