Axminster Hobby Series Benutzerhandbuch - Seite 6

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Säge Axminster Hobby Series herunter. Axminster Hobby Series 13 Seiten. Scroll saw
Auch für Axminster Hobby Series: Handbuch (20 seiten), Handbuch (20 seiten), Handbuch (12 seiten)

Seite drucken

Ridge

Hex screw

A pair of blade holders allowing the use of

Fig. 4

plain blades (see fig 4)

Blade holder

A. Remove the standard blade as described above, Note:

Centre hole

Easy access to the lower housing is provided, when the

Fig. 6

Fig. 5

side cover is removed.

Blade

B. Loosen the two hex screws either side of the holder &

slide the blade up into the centre hole & carefully

re-tighten both hex screws. Note: DO NOT

OVERTIGHTEN, as the blade will break. (see fig 5) Repeat

for the other holder.

4mm

hex key

C. Lower one end of the blade assembly through the

access hole in the table, ensure the blade teeth are

Housing recess

pointing DOWNWARDS & FORWARDS. Slot the lower

blade holder into the lower housing, making sure the

Clamping the blade

Lower housing beneath

holders ridge engages into the housing recess. (see fig 6)

into the holder

the work table