Axminster MCB100A Benutzerhandbuch - Seite 3

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Säge Axminster MCB100A herunter. Axminster MCB100A 20 Seiten. 4" metal cutting bandsaw

Axminster MCB100A Benutzerhandbuch
1. General Safety Rules
WARNING
1. Read and understand instructions of this
manual entirely before operating the
machine.
2. Always wear approved safety glasses
/face shields when using the machine.
3. Make certain the machine is properly
grounded.
4. Before machine in operation, remove ties,
rings, watches, other jewelry, and roll
your sleeves up to above elbows.
Remove loose clothing and confine long
hair.
5. Keep the floor around this machine clean
and free of scrap material, oil and grease.
6. Keep machine guards in place at all
times when the machine is in use. If it
removed for maintenance purpose, pay
extra attention and replace these guards
at once.
7. Do not over reach. Keep a balanced
stance all the time so that your don't fall
lean against blade or some other moving
parts.
8. Whenever make any adjustments or
maintenance with the machine must
unplugged the power source
9. Use the right tool. Don't force a tool or
attachment to do a job that it was not
designed for.
10. Replace warning labels if they have
become obscured or removed.
11. Make certain the motor switch is in "off"
position while connecting the machine
into the power supply.
12. Pay your work undivided attention.
Looking around, and carrying on a
conversation, or " horse-play "
careless acts which might result in
serious injury.
13. Keep visitors a safe distance from the
work area.
14. Use recommended accessories, and
parts. Improved accessories may be
hazardous.
15. Form the good habit of checking to see
keys and wrenches are removed before
turning on this machine,
16. Always keep hands & fingers away from
the black when this machine is running.
17. Never hold a material with this saw in the
horizontal position. Please be sure
always use the vise to clamp it securely.
18. Read and understand warnings that
posted on the machine.
19. Always provide necessary support for
long and heavy material
20. Use a sharp blade and always keep
machine clean for a best and safest
performance.
21. Failure to comply with any of these
warnings may cause serious injury.
are