Alphalite ILT-SMK-24 Einbauanleitung

Blättern Sie online oder laden Sie pdf Einbauanleitung für Racks & Ständer Alphalite ILT-SMK-24 herunter. Alphalite ILT-SMK-24 3 Seiten. Surface mount kit

Seite drucken

Installation Instructions

Surface Mount Kit

Installation guide valid for the following models:

ILT-SMK-22

ILT-SMK-24

ILT-SMK-14

WARNING

RISK OF ELECTRIC SHOCK.

Disconnect power at fuse or circuit breaker before installing or servicing.

WARNING

RISK OF FIRE OR ELECTRIC SHOCK.

The Surface Mount Kit must be installed by a qualified electrician in accordance with applicable

federal, state, and local laws and codes. Installation requires knowledge of luminaire electrical

systems and installer should be familiar with the operation of this product. If not qualified, do not

attempt installation; contact a qualified electrician. Manufacturer assumes no responsibility for the

improper installation of this luminaire.

WARNING

To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp

objects. When installing this kit, drilling may damage luminaire wiring and electrical parts. Check for

wiring and components in enclosure before drilling.

NOTE

Only those open holes indicated in the photographs and/or drawings may be made or altered as

a result of kit installation. DO not leave any other open holes in an enclosure of wiring or electrical

components.

NOTE

To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or any shape

objects.

Contact manufacturer with any questions or concerns regarding installation of this luminaire.

10715 Springdale Ave, Ste 4, Santa Fe Springs, CA 90670

Tel: 1-888-287-9228

Fax: 1-888-258-9183

E-mail: [email protected]