Cineroid L2C-3K5K Handbuch - Seite 5

Blättern Sie online oder laden Sie pdf Handbuch für Kamera-Zubehör Cineroid L2C-3K5K herunter. Cineroid L2C-3K5K 7 Seiten. Cineroid led light manual

Powering On/Off

1. Move the power switch to"ON"to turn on the LED light.

2. Check to see of if the information on the LCD is displayed properly.

3. Move the power switch to "OFF" to turn off the LED light.

1. Turn the brightness dial side to side to adjust the brightness.

2. The brightness range is from 0~30 and the current level is displayed on the LCD.

3. Turning the dial to the right increases brightness.

4. Turning the dial to the left decreases brightness.

5. Adjusting the brightness to zero DOES NOT power off the LED light.

LED Light

SECULINE Co., Ltd

OFF

SECULINE Co., Ltd

1. The Cineroid LED light has a built-in fan to control the heat level.

2. Adjust the speed of the fan to reduce noise in shooting situations.

3. Turn the fan switch from "A"(Auto) to "M"(Manual) and the current fan speed will

be displayed on the LCD.

3. Press the fan control button to adjust the speed of the fan. The speed ranges from

1~5 with 1 being the slowest speed.

4. The fan will not turn on if the speed is set to zero.

5. Setting the fan speed to zero to turn off the fan will result in increasing the heat level of

the LED light. This will cause the light to automatically turn fan on.

The too high heat level will cause to shut off and a warning "HO" will appear on

the LCD display.

1. Mounting the grid will prevent the light from spreading to the sides.

2. Line up the magnets on the grid to the lamp to mount the grid.

LED Light