Cino Fuzzyscan Schnellstart-Handbuch - Seite 3

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Barcode-Leser Cino Fuzzyscan herunter. Cino Fuzzyscan 17 Seiten. Bluetooth cordless scanner
Auch für Cino Fuzzyscan: Schnellstart-Handbuch (17 seiten), Schnellstart-Handbuch (17 seiten), Schnellstart-Handbuch (15 seiten), Schnellstart-Handbuch (17 seiten), Kurzreferenz-Handbuch (12 seiten), Schnellstart-Handbuch (17 seiten)

Preparations before Using

Charge the Battery via Power Supply Unit

Charge the Battery via USB 3.0 Port

Take off the battery cover from the scanner by

removing two blue tapes.

Ensure the battery contacts of the battery pack

are facing the charging contacts inside the

battery cavity. Then click the battery pack into

the battery cavity carefully.

Place the battery cover in the right orientation

onto the back of the scanner. Screw in and

tighten the four shipped M2 screws in

sequence by a small screw-driver in the

clockwise direction.

Choose the right plug and slot it into the power

supply unit cavity until a "click" is heard. Then

plug the power supply unit into the wall outlet.

Please make sure the USB bus power switch

is in "OFF" position.

Plug the DC connector of the power supply

unit into the DC Jack of the cradle. The cradle

emits four beeps. For the Smart cradle, the

central indicator blinks blue once and side

indicators lights red. For the charging cradle,

the central indicator lights blue.

Place the scanner onto the cradle. When the

battery is fully charged, the status indicator of

scanner will light green.

The scanner can also be charged via the USB

3.0 port without the power supply unit. You

can connect the cradle to USB 3.0 port of host

device by a USB cable, then slide the USB

bus power switch to "ON". After that, place the

scanner onto the cradle.

The scanner can also be charged via its micro

USB port by connecting the micro USB cable

to USB 3.0 port of host device or the

commercial USB power supply unit connected

to the wall socket.