Cino SD112 Schnellstart-Handbuch - Seite 2

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Drahtloser Router Cino SD112 herunter. Cino SD112 4 Seiten. Bluetooth smart dongle
Auch für Cino SD112: Schnellstart-Handbuch (5 seiten)

Seite drucken

Getting Familiar with Your Bluetooth

Smart Dongle

Cino's smart dongle is an instant plug-and-play solution that connects

FuzzyScan Bluetooth imagers with a host device that lacks Bluetooth

capabilities. Incorporating a Bluetooth® v4.0 radio, the smart dongle delivers

a wireless communication range of over 100 meters. It is compatible with

most operating systems and no separate driver installation is required when

the imager is used in USB HID Standard mode.

This document serves as a quick reference guide for the dongle's installation

and operation. Please visit www.cino.com.tw for details.

Installation

Pairing Bluetooth Imager with Dongle

Turn on your FuzzyScan Bluetooth imager. Make sure it is in an unpaired

state: its status indicator should emit alternating red-green flashes.

Otherwise, scan the "Uninstall" command barcode to release any prior

pairing.

Initiate the dongle-imager pairing process by scanning the dongle's

"Quick Pair" barcode label. Your imager will then produce clicking sounds,

and its link indicator will flash blue rapidly. During this process, your

dongle will continue to emit red and green lights.

Upon successful pairing, the scanner will beep 4 times in ascending tone,

and its link indicator will flash blue every 2.5 seconds. The dongle's

power/pairing indicator will be a steady blue.

The Quick Pair barcode on your dongle is designed for "Pair Mode",

i.e. the dongle can only pair with one imager at a time.

The dongle's default host interface setting is USB HID. To change this

setting to USB COM, please first install the USB2COM driver on your

host device.

Remove the dongle's cap.

Plug the dongle into your host device's USB port.

Supply power to the dongle by turning on your host

device. The power/pairing indicator will flash blue once

and its status indicator will emit alternating red-green

flashes ("unpaired state") when powered on.

Status Indicator

Power/Pairing Indicator

Quick Pair Command Barcode

Cap