Cipax CPX Series Installations- und Benutzerhandbuch - Seite 12

Blättern Sie online oder laden Sie pdf Installations- und Benutzerhandbuch für Warmwasserbereiter Cipax CPX Series herunter. Cipax CPX Series 17 Seiten. Closed tank 1350l

Seite drucken

Choose a location where there will be a sufficient incline for drainage pipes and where the

ground is considered to be well drained and stable. At risk of intrusion of groundwater into the

pit, it is beneficial if a drainage out from the pit is arranged.

The pit should be at least 50 cm larger than the tank's external dimensions.

The tank shall not be installed where there is a risk of overrun e.g. by cars; where there is a risk

at any time of the year that the groundwater level reaches the inlet tube or where the ground is

marshy and unstable. Consideration should also be given to the frost depth of the location.

Remember to:

Investigate the maximum permitted distance and suction height for waste removal vehicles for

the areas prior to installation.

If there is any risk the ground water level can reach

up to the bottom of the tank the tank should then

be secured. If bands are chosen then use a model that

are age resistant. Place the bands as shown in the picture.

Make sure no sharp edges at the band buckles

are resting against the tank.

Alternatively a specific anchoring canvas can also

be used.

Anchor plates of a suitable size and dimension

must be embedded at each end of the straps

to prevent the tank from moving vertically.

The tank must stand on at least a 150 mm

thick layer of leveled gravel or sand with a

max. grain size of 8 mm. Ideally, this bed

should be compressed using a vibratory

plate compactor.

Remember:

The lifting force for an empty tank

Together with maximum permitted

groundwater level is 13,500 N

equivalent to 1,350 kg

Tank pit

Securing of the tank