Accurate Technology Digi Scale Model 20 Benutzerhandbuch - Seite 15

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Messgeräte Accurate Technology Digi Scale Model 20 herunter. Accurate Technology Digi Scale Model 20 17 Seiten.

Seite drucken

Frequently Asked Questions

What F/W (Firmware) version do I have?

The display will show P1.xxx on power up. This is the firmware version that your

Readout uses.

What does "Err2" mean?

If the Encoder is off the scale, or the Encoder cable is unplugged from the Readout,

ERR 2 will appear on the display. To clear error:

1. Be sure the Encoder is on the scale.

2. Unplug the connector from the Readout for one second and reconnect..

What does "Err4" mean?

Attempting to display measurements over 99 inches in fractions:

This digital Readout will only read up to 99 63/64 in fractions mode. You must use

either the decimal or metric modes when measuring over 99 63/64 inches.

The keys don't seem to do what they are supposed to do.

Timing, that is how long a key is depressed, and the combination of the keys pressed is

important.

This manual uses the term '"momentarily" to describe a key press of

typically less than 1 second. Whereas "press and hold" is used imply a key press of

typically longer than 1.5 seconds. As an example; when using a PC keyboard to type a

capital letter you would "press and hold" the SHIFT key and "momentarily depress the

LETTER key.

In addition, keep in mind the key(s) "function" is executed on the key RELEASE, not

the key DEPRESS. This is important since some keys execute different functions

based on how long they are depressed.

The battery clips seem to be very loose. Is this normal?

Yes. DO NOT attempt to bend these clips or wedge anything between them and the

case. These clips are designed to expand when the two case halves are screwed

together.

The readings are "backwards"?

You can change the "scaling" direction of the system by:

1. Reversing the orientation of the Encoder on the Scale

2. Changing the position of Jumper JP1 on the circuit board

Accurate Technology Digi Scale

Page 15 of 17