Accurate Technology ProScale 950 Series Schnellstart-Handbuch - Seite 4

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Messgeräte Accurate Technology ProScale 950 Series herunter. Accurate Technology ProScale 950 Series 17 Seiten. Flush mount readouts

Seite drucken

Power:

These readouts are powered by a single CR123 lithium battery. Unless

specially ordered, the readout will deliver to you with the battery installed.

New for this version readout:

A battery indicator will appear on the left side of the LCD screen.

There are 3 tiers of battery shown, which represent the voltage

level of the battery. When only one tier is left, a new battery

should be prepared for installation soon. Typical battery life for

these readouts is 18 months, but life will depend on how often

the readout is being used, and which programming options are

enabled.

Battery Replacement:

Remove the 2 screws in the upper right and lower left corners of the readout.

Lift the cover off. Remove the old battery and install a new battery, noting the

proper orientation. Replace the cover and screws.

External Power:

These readouts also support use of external power if:

1. The scale type is any model except Model 150B or Model 250B type.

(Consult factory for assistance if scale type is not known.)

2. The input power is 12 – 24 volts DC. (AC power source is not

supported.)

3. The 3-position terminal strip for the readout has been supplied.

4. Common for the machine and the readout must be the same. A "hot

chassis" condition may permanently damage some or all of the

electronics.

New for this version readout:

If external power is used, but a power loss occurs, the readout will

automatically switch to battery power (if a battery is installed). Likewise, the

readout will automatically switch to external power is restored.

Operation Manual for ProScale LCD Readouts, version 4

Page 4 of 16