Arcade Guns G-500 Benutzerhandbuch - Seite 10

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Videospiel-Controller Arcade Guns G-500 herunter. Arcade Guns G-500 20 Seiten.

PC Shooter Games Setup

PC shooter games, also known as rail shooters, typically work with a mouse right out of

the box. Since your Arcade Guns™ light guns also work as a mouse they can be used

to play these classic shooter games just like in the arcade! One drawback however is

that they only support one mouse or light gun at a time by default. The second player is

usually stuck using a keyboard to play, which is no way to play a shooting game!

If you only plan on playing these games in single player mode, you can ignore the

following setup. If you want to play these games with dual light guns you will need to

install a program called "The Trouble Shooter". The Trouble Shooter is a program that

will patch a specific list of games to work with more than one light gun.

First step is to download The Trouble Shooter software patch here:

http://thetroubleshooter.home.mindspring.com/downloads.htm

Before you begin make sure that your Arcade Guns™ Light Guns are plugged into your

computer. Install the software patch listed above and then reboot your computer. Open

the control panel and switch it to classic view so that you can see all of the programs.

There will be a new program labeled "Light Guns" which needs to be configured to work

with your Arcade Guns™ Light Guns. Launch the program by double clicking on it.

Use the drop down box shown in the following example and select:

"Dual Act Labs PC USB Light Guns".

Then select:

"USB Human Interface Device (1)" for player one

"USB Human Interface Device (2)" for player two

For complete instructions please follow this link:

http://thetroubleshooter.home.mindspring.com/instructions.htm

Note: The image shown on the next page was taken from a 32bit Windows XP Machine.

The Trouble Shooter program was written for windows XP originally but will also work

on Windows Vista and 7. In Vista and windows 7 the program has a small bug which

causes the names of the devices to not display correctly and shows up as gibberish. If

you are using Vista or 7 you will need to select a device for player 1 and player 2 by

guessing. If you guess wrong you can change your selection later.

Arcade Guns™ User Manual