ABB ATS Annunciator Schnellstart-Handbuch - Seite 2
Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Controller ABB ATS Annunciator herunter. ABB ATS Annunciator 12 Seiten. Modbus; ats annunciator monitors and controls up to 8 automatic transfer switches equipped with the mx150/250 controller.
Seite drucken
2
Review Information sections before beginning installation. Information sections follow installation steps
—
Step 1 - Mount Annunciator
1. Attach both mounting brackets to unit - 2 screws each bracket
Brackets may be attached to top and bottom or left and right sides.
Orient brackets for wall or flush mount.
2. Mount unit to desired NEMA-1 location.
—
Step 2 - Run Conduits
Run conduits
Between the Annunciator and all ATSs.
Between the Annunciator and the power source.
Knockouts are located on all 4 sides of the Annunciator.
—
Step 3 - Ground Annunciator
Ground to 6-32 stud inside box.
Knockouts (typical)
Ground Lug Landing
Inside box