Arcadyan WA9102BAC33 Benutzerhandbuch - Seite 2

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Drahtloser Zugangspunkt Arcadyan WA9102BAC33 herunter. Arcadyan WA9102BAC33 5 Seiten.

Seite drucken

LED Indicators

ETH2/ETH1 (Gigabit Ethernet Port)
On
Ethernet connection has been
established.
5G (IEEE 802.11a/n/ac)
On
5GHz wireless link has been
established.
2.4G (IEEE 802.11b/g/n)
On
2.4GHz wireless link has been
established.
Run (Power)
On
Powered on
II
Flashing
The indicated Gigabit LAN port is
sending or receiving data.
Flashing
Data is transmitted via 5GHz
wireless link.
Flashing
Data is transmitted via 2.4GHz
wireless link.
Flashing
The access point is
establishing a wireless link via
wireless access controller. It
connects to your network operation
center.

Connection Interface

Gigabit Ethernet Ports (RJ-45)
ETH1/ PoE, ETH2 –
Connect devices on your local area network to these ports (i.e., a PC,
hub, switch or IP set top box).
This access point supports power over Ethernet (PoE). It can be
powered by PoE with long length cabling. Connect the PoE port to
your gateway or a switch.
USB Port – Connect your USB device to this port.
RESET Button – Use this button to reset the power and restore the factory
default settings.
DC 12V Power Inlet – Connect the included power adapter to this inlet.
III
  