Arcam FMJ A28 - V1 Handbuch - Seite 7

Blättern Sie online oder laden Sie pdf Handbuch für Verstärken Arcam FMJ A28 - V1 herunter. Arcam FMJ A28 - V1 17 Seiten.

Seite drucken

Pre-/power-amplifier connections

pRE oUT

To use your A28 as a dedicated pre-amplifier, or as part

of a bi-amp' e d system, connect the

sockets to

pRE oUT

the input sockets of your power amplifier.

Recording loop

The A28 is equipped with a recording loop, for use with

recording devices (such as a CD recorder, DAT recorder,

cassette recorder, VCR, PVR etc.).

AV RECoRD oUT

Connect these output sockets to the input sockets of

your recording device (usually labelled

RECoRD

AV pLAY IN

Connect the output sockets of your recording device

(usually labelled

) to these inputs.

pLAY

oUT

If you do not have a recording device, you can use this

input for other (line-level) equipment, such as a TV,

DVD, CD player, radio tuner, PVR, etc.

controlling the a28 from a second room

The A28 will require a remote pick-up device with a 12V external power supply (such as a Xantech Dinky

Link) located in Zone 2, together with a power amplifier (such as an Arcam A28 or P38) to complete the

system.

The diagram shows the wiring scheme, which also applies to other IR pick-up devices commonly available.

The A28 can also provide a +12V trigger output to control devices such as the power amplifier in Zone 2.

The +12V trigger is active when the unit is 'On' .

audio inputs

Although the inputs are labelled for specific devices, all

have the same characteristics and each may be used with

any line-level product. The exception is the Phono input

(see page 14 for the specification).

DVD

Intended for the analogue outputs from a DVD-player.

Intended for the analogue outputs from general audio-

visual equipment, such as a VCR, digital TV/satellite

receiver, or Nicam tuner.

TUNER

Intended for the analogue outputs from an FM, AM or

DAB radio tuner.

Intended for the analogue outputs from a CD player.

AUX

This is intended for general use, or for connecting an

iPod® via an Arcam rLead or rDock. However, it can

also be used to connect the analogue audio outputs

of any unit with a line-level output (such as a games

console or set-top box).

SAT

For connection to a satellite TV receiver or cable box.

e-7

Phono input

The phono inputs provide a pre-amplification stage to

treat the low-voltage output from a moving magnet

cartridge. If you have already an external phono amplifier

that you wish to use, connect its output to one of the line-

level inputs, such as the

input.

AUX

REMoTE IN

Tip = Signal

Sleeve = 0V

Dinky Link, located in Zone 2

Signal

+12V