AXTON PERFECT V-FIT AC26E46 Installationshandbuch - Seite 7

Blättern Sie online oder laden Sie pdf Installationshandbuch für Lautsprechersystem AXTON PERFECT V-FIT AC26E46 herunter. AXTON PERFECT V-FIT AC26E46 13 Seiten. 2-way component system

Seite drucken

MOUNTING THE MID/WOOFERS



WARNING

Before you remove the door panel, it's very important to disconnect the battery from the

electrical system of the vehicle. This step is very significant, because the side-airbag is be-

hind the door panel. Unscrew the terminal of the negative battery pole.

Never damage or never disconnect a wire of the airbag and its affected parts!

For removing the door panels its necessary to remove some screws first. Two screws are

located under the armrest; another screw is under the cover of the mirror-adjustment panel.

The next two screws can be found behind the design panel in the upper area of the door

panel. Then, you'll find a screw is behind the "AIRBAG" plate. This plate can be removed

easily by a small screwdriver or by hand. The last screw sits behind a small cover in the

center area of the door opener.

Use the plastic wedge to lever the door panel off the door. To avoid scratches on the varnish,

adhere some tape on the affected area.

Start levering from the bottom area of the door panel and go step by step to the sides (But

do not lever on top of the door panel near the window!). The next step is to remove door

panel: Pull the door panel carefully up and to the backside, start at the end of the door.

Disconnect all plugs between the door panel and door. The bowden cable is held by a

cover on the door opener. Remove the cover carefully by a screwdriver or by hand and then

hang out the bowden cable from the door opener.

Unscrew the screws of the original speaker and replace it with the new AXTON woofer.

Do this on both front doors and panels. You can use the original screws to fix the new

woofers.

AC26E46 V-Fit Manual.indd 7

– 7 –

12.02.2008 17:09:20 Uhr