Arcam ST5 Benutzerhandbuch - Seite 12

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Verstärken Arcam ST5 herunter. Arcam ST5 16 Seiten.

Seite drucken

Menu

To access the setting menu, press the MENU button
To navigate the menu use the navigation buttons on the remote control.

Menu Tree

Output Type
Volume Output
Max External Vol
Network Standby
Eco Timer
DAC Filter
System Reset
USB Update
NET Version
Host Version
IP Address
UNIT ID

Supported File Formats

File Type
AAC
16 or 24 bit
AIFF
16 or 24 bit
ALAC
16 or 24 bit
FLAC
16 or 24 bit
MP3
16 bit
OGG
16 bit
WAV
16 or 24 bit
WMA
16 bit
12
ARCAM ST5 Owner's Manual EN
Selects which output to use, Analog or Digital with full or partial MQA decoding (where MQA
encoded content is being played).
Default is Analogue.
Selects whether the audio output volume is Variable, Fixed or External.
Default is Variable.
Defines maximum volume sent to external amplifier.
Default is 40.
Selects whether the Network Connection is maintained in standby.
Default is On.
When enabled, the ST5 will enter standby after 20 minutes with no user interaction or
playback.
Default is On.
Select a digital filter for the analogue outputs.
Default is Fast.
Press Select/OK to initiate a reset of all settings to default.
Press Select/OK to initiate a software update from a USB stick present in the USB socket on
the rear panel.
Displays the current NET software version in operation on the ST5.
Displays the current HOST software version in operation on the ST5.
Displays the current IP address of the ST5 on your network.
Displays the NETWORK ID of the ST5 as identified to other devices on the network.
Bit Depths
44.1, 48, 88.2 or 96 kHz
44.1, 48, 88.2, 96, 176.4 or 192 kHz
44.1, 48, 88.2, 96, 176.4 or 192 kHz
44.1, 48, 88.2, 96, 176.4 or 192 kHz
44.1 or 48 kHz
44.1 or 48 kHz
44.1, 48, 88.2, 96, 176.4 or 192 kHz
44.1 or 48 kHz
on the remote control.
Sample Rates