Arcam FMJ CD33 Handbuch - Seite 6

Blättern Sie online oder laden Sie pdf Handbuch für CD-Spieler Arcam FMJ CD33 herunter. Arcam FMJ CD33 8 Seiten. Arcam compact disc player cd33

Seite drucken

Using the remote control

CD/DVD

Ensure that CD mode is selected using the CD/DVD

toggle button.The 'CD' LED above the CD/DVD button is

lit briefly when CD mode is selected.

DISP

Turns the display on or off.Turning the display off generally

produces a slight improvement in sound quality.

A–B

This button enables you to repeat any section of music

within a track.Whilst the disc is playing, press the 'A–B'

button at the start of the section you wish to repeat.

'REPEAT' is shown on the display and the letter 'A–' flashes.

Press the button a second time when you reach the end

of the section you wish to repeat.The 'A–B' letters stop

flashing and remain lit.This section will repeat until you

press ' ' or '

' or '

'.The forward search button (

moves forward within the selected loop.

RPT

To repeat the entire CD or a pre-programmed selection

of tracks press 'RPT' once:'REPEAT' lights on the display.To

repeat a particular track, select that track and then press

'RPT' twice so that 'REPEAT 1' is shown on the display.

If you now select a different track, that track is repeated

instead.

To cancel the repeat function press 'RPT' a third time.

SKIP AND SEARCH TRACK

Skip track backwards and forwards; Search backwards and

forwards.

OPEN

Opens and closes the CD tray

PLAYBACK CONTROL

Pause, Play and Stop

P MODE

Press once to shuffle play CD tracks (i.e. play them in a random

order). Press again to cancel shuffle play.

TITLE

Press '

once to display the remaining time of the currently

TITLE'

playing track. Press again to display the time remaining of the

disc. Press a third time to turn the text display on.

Press '

again and the display reverts to its original setting,

TITLE'

showing the time elapsed for the current track.

For CDs with text, pressing '

once while the disc is loaded

TITLE'

but not playing displays the artist's name.

Pressing '

a second time displays the total number of

TITLE'

tracks and the total playing time.

CD/DVD REMOTE

DVD

DISP

A-B

RPT

CLEAR

)

OPEN

SUBT

TITLE

MODE

ZOOM

AUDIO

MEM

ANGLE

SETUP

STATUS

CR-314

0–9 KEYPAD

This allows direct access to individual tracks on the

disc.To select a track, press the corresponding keypad

button and then press

9, enter the digits in sequence. For example, to play

track 15, press and hold 1, then press 5.

CLEAR

If you make a mistake whilst programming you can

delete the last entered track by pressing 'CLEAR'.

To delete all the programmed tracks press 'CLEAR'

repeatedly until '0' is displayed.

To exit the program facility, press 'PROG'.

PROG

You can program a selection of up to 24 tracks from

a disc to play in any order. Select a track by using the

PROG

and

buttons, then press 'PROG' to program

the track into memory ('PROGRAM' appears

on the display to indicate that you have started

programming a sequence). Repeat these steps to

program the remaining tracks in your selection.

Alternatively, press 'PROG' once and enter your track

selection using the 0–9 keypad.

The display shows the track numbers programmed,

the total length of the programmed sequence and

the number of tracks programmed (shown by a

number below the word 'STEP').

Each time you enter a track, the number below 'STEP'

increments by one and flashes until you press 'PROG'

to confirm. If you fail to press 'PROG' within about

five seconds, the display stops flashing and you will

have to reselect the track.

MUTE

Press '

' to play the program. Press '

replay the entire sequence from the start. Press and

hold 'CLEAR' to erase the programmed sequence.

Press 'PROG' again to exit the program facility: the

display flashes 'CONTINUE' and shows '0'.

MUTE

Stops sound to the speaker outputs of certain Arcam

amplifiers.

RTN

SRCH

VOLUME +/–

Adjusts the volume on Arcam remote-controllable

amplifiers.

Note that the volume '+/–' controls and 'MUTE'

button have no effect on the audio output level of

the CD players.

NOTE

Remember to install the two AAA batteries supplied

before trying to use your remote control.

Do not place anything in front of the FMJ badge on

the top left of the CD player (where the IR receiver

is located), or the remote control may not work.

Note that greyed-out buttons on the remote control

are DVD-specific and are not used with the CD

player.

. For tracks greater than

' again to