Arcam fmj D33 Benutzerhandbuch - Seite 8

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Medienkonverter Arcam fmj D33 herunter. Arcam fmj D33 13 Seiten. Digital to analogue converter

Seite drucken

operation

Switching on

Switch the unit on by pressing the

button. The

pOWER

status LED glows green when the unit is powered up and

red when in stand-by mode. The remote control is used

to enter and exit standby mode. If the

button is

pOWER

pressed (or power is removed) whilst in standby, the

unit will power up fully when power is re-applied.

note that the remote control sensor is located

underneath the FMJ logo. Do not obstruct this or the

remote control will not work.

Input selection

Select any of the digital audio inputs by pressing the

corresponding front panel or remote control button.

The associated front panel LED will glow red to denote

an inactive connection and green when a valid signal is

detected. The LED will flash green if the signal is invalid

(e.g. a Dolby Digital bitstream). The detected sample

rate will be indicated via the sample rate display at the

left-hand side of the front panel.

Filter selection

Oversampled digital-to-analogue conversion uses

digital filtering to process the signal. The D33 uses

custom processing to provide two different digital

filters, allowing the conversion process to be optimised

to personal preference and listening material. Use the

button on the remote control or front panel to

FIlTER

toggle between the two filter options.

44.1

88.2

176.4

192

volume and Mute

The remote control provides volume and mute buttons

which are programmed to control any Arcam amplifier.

note that the volume at the D33 output remains fixed at

line level (maximum volume) at all times.

Transport Controls

The remote control provides

plAy

pAuSE

STOp

SkIp

and

transport controls. These can be

bACk

SkIp FORWARD

used to control media software running on a connected

computer compatible with the USB HID protocol, or to

control playback of a connected Apple device.

OPTICAL

COAX

Amplifier Mute & volume

power

Transport Controls

Input Selection

Filter Selection

e-8

ULTRA HIGH PRECISION DIGITAL TO ANALOGUE CONVERTER D33

iPod

USB

AES/EBU

FILTER

POWER

USB

iPod

COAX 1

COAX 2

AES

OPT1

OPT2

FILTER

CR107