Axus AXP15 Benutzerhandbuch - Seite 3

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Tastatur Axus AXP15 herunter. Axus AXP15 4 Seiten. Portable electronic keyboard

Seite drucken

□

Basic Method of Performance

Push the [POWER] button with the LED display showing the present tempo at

120. In this state, any operation on the instrument works. There is a electricity-saving

function, that is, all the present function can exit if there is no keystroke within 3

minutes; and any keystroke can arouse the system function again.

1. Volume Adjustment

Press the [MASTER VOL +/-] to increase or decrease the master volume. Apply

the both at the same time, the volume will turn back to the preset stage. The [ACCOM

+/-] button works in the same way as the [MASTER VOL +/-] does.

2. Demonstration Songs

There are 8 pieces of demonstration song reserved in the system. The [DEMO

ONE] is in charge of playing the present demonstration song repeatedly, while the

[DEMO ALL] button is in the charge of playing all the demo songs successively. In the

state of the [DEMO ONE] or [DEMO ALL], pressing either of the buttons for the

second time can stop the present song, and the third time, get into the next song.

3. Selection of Timbre

There are 100 kinds of timbres in the system , ranging from "00" to "99". The

target timbre can be picked out by pressing the [TIMBRE] buttons first then the [+/-]

buttons.

4. Effect Control

Press the [VIBRATO] button, the sound of the keystrokes takes on a vibrato

effect. Press the button again, the function quits.

Press the [SUSTAIN] button, the sound of the keystrokes takes on a sustain

effect. Press the button again, the function quits.

5. Percussion

There are 8 percussion keys on the panel. Press the [PERCUSSIONS] button,

the percussion performance can be carried out on these keys.

6. Auto-Rhythm and Program

(1 )There are 100 pieces of rhythm can be chosen from. The target rhythm can be

picked out by pressing the [RHYTHM] buttons first then the [+/-] buttons. Press the

[START/STOP] button to start or stop the rhythm function.

(2) Press the [SYNC] button, any keystroke on the chord keyboard ( 19 keys on

the left part of the keyboard ) can make the performance and the accompaniment

rhythm go on at the same time.

(3) press the [FILL-IN] button, a piece of variation can be inserted into the

rhythm. By pressing the [FILL-IN] button firmly, the present piece of variation can be

repeated. When the [RHYTHM] button is out of charge, applying the [FILL-IN] button

can start a piece of variation, then a piece of rhythm will succeed.

(4) Tempo Adjustment

Press the [TEMPO+/-] button, the tempo of the rhythm can be quickened or

slowed.

7. Program

Press the [PROG] button, any bit piece of the keyboard percussion can be edited

into a piece of rhythm. The full memory or pressing the button again will stop the

program. Press the [PLAY] button, the edited rhythm can be played repeatedly.

8. Auto-Bass Chord

Press the [SINGLE] or the [FINGERED] button, the single-finger chord or the

fingered chord can be performed on the chord keyboard (the 19 keys on the left part

of the keyboard). When it is out of the charge of the [RHYTHM] button, the manual

chord is on; while in the charge of the [RHYTHM] button, the auto-chord is on, and

the auto-chord accompaniment can be performed on the chord keyboard with the

Single or fingered scales . Press the [CHORD OFF] button, the chord quits

9. Record and Playback

After pressing the [REC] button, all, or, as many as 52 notes that are played can

be recorded. Press the [PLAY] button, the recorded melody can be played .

10. Intelligent Teaching Function

(1) Press the [ONE KEY] button, the One-Key teaching function is ready. Now

the practice of the target song's melody can be carried out on the keyboard. Any note

key, even the wrong one, can proceed the whole melody, which can help the learner

concentrate on playing the right notes in time. After finishing one piece of melody, the

system will get into another piece. Press the [ONE KEY] button again, the function

quits.

(2) Press the [ENSEMBLE] button, the system will play the accompaniment

automatically, then the learner should play the main melody correctly. The timbre will

follow the one of the original melody. If there is no keystroke in 8 beats, the system

will carry out the notes of the main melody. After finishing one piece of melody, the

system will get into another piece. Press the [ENSEMBLE] button again, the function

quits.

□

Cautions

1. Make sure that the both are power off when connecting the instrument with

other amplifiers.

2. Keep the instrument away from dampness, dust, heats or being exposed to

sunshine for long, which may result in the damage of the components.

3. Keep the instrument away from the acidic or alkaline substance. Also avoid

applying the instrument in an environment with heavy corrosive gases, which may

damage the circuitry of the instrument.

4. Turn off and unplug the instrument after performance.

5. For a long time of leaving it unused, Please take out all batteries, otherwise,

the released liquid may damage the gadgets.

6. Please clean the body with a piece of dry and soft cloth.