Arcan CEALJ2T Betriebshandbuch

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Buben Arcan CEALJ2T herunter. Arcan CEALJ2T 3 Seiten. 1,814 kg capacity aluminum service jack

Seite drucken

CEALJ2T

PRIOR TO OPERATION

Air may become trapped in the hydraulic system during transit.

To purge air:

1. Open release valve by turning handle counterclockwise.

2. Pump handle rapidly 4 full strokes. This will expel air that

may have entered hydraulic fluid passages during transit.

3. Close release valve by rotating handle clockwise and

pump handle.

4. If lift arm raises to full height, jack is ready for use.

If not, repeat this procedure or follow trouble shooting

instructions provided.

MAINTENANCE AND INSPECTION

IMPORTANT: When adding or replacing hydraulic fluid,

always use a quality hydraulic fluid. DO NOT use brake fluid,

alcohol, glycerin, detergent motor oil, or dirty oil as improper

fluid can cause serious internal damage to jack.

To add hydraulic fluid: With saddle fully lowered and jack

on level ground, remove filler plug. The hydraulic fluid should

just cover the surface of the internal cylinder visible through

the hole. Do not overfill. Replace filler plug. If low, add

hydraulic fluid as needed.

Maintenance and Inspection: The owner and/or user

must maintain and inspect the jack in accordance with the

manufacturer's instructions.

SPECIFICATIONS:

Capacity

(2T US ANSI) 1,814 kg Maximum

Minimum Height

Maximum Height

Length

Chassis Width

Handle Length

Saddle Diameter

Net Weight

Shipping Weight

CEALJ2T

(2T US ANSI) 1,814 kg CApACITy ALUmINUm SErvICE JACk

pArTS BrEAkDOWN AND OpErATINg mANUAL

89 mm

498 mm

673 mm

330 mm

1270 mm

114 mm

21.5 kg

23 kg

This operaTing manual conTains imporTanT

safeTy informaTion. read carefully and

undersTand all informaTion before operaTing

Tool. save This manual for fuTure use.

The cealJ2T aluminum service JacK conforms To:

• en 1494:2000 sTandards

sTudy, undersTand and folloW all insTrucTions before operaTing This

device. do noT eXceed raTed capaciTy. use only on hard level surfaces

capable of supporTing The load.

This is a lifTing device only. immediaTely afTer lifTing, supporT The

vehicle WiTh appropriaTe means.

do noT move or dolly The vehicle While on The JacK. lifT vehicle only in

areas specified by The vehicle manufacTurer.

no alTeraTions shall be made To This producT.

do noT use JacK in adverse or eXTreme WeaTher condiTions, in sTrong

magneTic fields, in Windy condiTions, or on uneven or unsTable ground.

use of floor JacK near sTaTic elecTriciTy is noT recommended.

do noT handle loads ThaT mighT lead To dangerous siTuaTions

(for eXample: acids, radioacive maTerial, briTTle or fragile loads)

insTrucTions, safeTy informaTion, and safe operaTing procedures

musT be communicaTed in The oWner/operaTor's naTive and undersTood

language prior To auThoriZed use. maKe sure The oWner/operaTor is

fully aWare of safe use and inherenT dangers associaTed WiTh This

producT.

dispose of used hydraulic JacK oil in accordance WiTh local

regulaTions.

clear The area of bysTanders, especially small children, Tools or

oTher obJecTs before using.

lifTing of people WiTh The floor JacK is prohibiTed.

do noT use floor JacK in direcT conTacT WiTh food or food ingredienTs.

use of floor JacK on sea vessels is prohibiTed.

inspecT JacK prior To each use. do noT aTTempT use if The uniT is

broKen, benT, cracKed, or has missing and/or damaged parTs. replace

broKen, benT, cracKed, missing and/or damaged parTs, and/or missing

labels, Warnings, and/or decals WiTh facTory auThoriZed parTs prior

To use.

any JacK ThaT appears To be damaged or has Worn parTs should be

removed from service immediaTely.

for your safeTy and To prevenT inJury use service JacK for lifTing

purposes only.

alWays supporT vehicle WiTh JacK sTands.

failure To heed These Warnings may resulT in personal inJury and/or

properTy damage.

• ansi/asme pald sTandards

rev. 06/11/12