Arcan AR8045 Betriebshandbuch - Seite 3

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Outdoor-Wagen Arcan AR8045 herunter. Arcan AR8045 4 Seiten. Heavy duty 5 drawer service cart

Seite drucken

ASSEMBLY INSTRUCTIONS

Step 3: Connecting the bottom tray to the

chrome legs.

Lift the cart and place on top of the bottom tray with

chrome legs through the square leg-holes. Align bolt

holes in bottom tray with lower holes in legs and

insert an M6x40 bolt through the washer, bolt holes,

and legs as shown. Repeat with all remaining holes

in bottom tray.

Step 4: IMPORTANT: Tighten all bolts.

At this point, all bolts should be tightened. Tighten

bolts opposite each other rather than tightening all

bolts on one side first so that cart remains aligned.

Avoid using excessive force when tightening bolts.

Over-tightening bolts can make drawers bind and

hinder their operation.

Step 5: Attaching casters.

With the provided keys, lock all drawers, the top, and

the Pry Bar Holder to prevent them from opening. Turn

the cart upside down, allowing it to rest on chrome leg

tops with the plastic inserts facing up.

Do not allow the Side Work

Bench to swing freely, as it may

NOTE

be damaged or cause injury as

cart is turned upside down.

Insert the stem of one caster into the hole in a plastic

insert. Using a rubber mallet, hammer the casters into

place until the stem is no longer visible. Repeat with

other casters.

Ensure that both locking casters

NOTE

are on same end of the cart.

Once casters are installed, stand cart upright.

Assembly is complete.

AR8045: Parts Breakdown & Operating Manual

Bottom

Tray

M6x40

Chrome

Legs

Bolts

100108