ABB i-bus 6164 U-500 Betriebsanleitung - Seite 3

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Controller ABB i-bus 6164 U-500 herunter. ABB i-bus 6164 U-500 11 Seiten. Eib heating actuator

Seite drucken

Important instructions

When planning and erecting electrical systems the

relevant standards and regulations applicable in

the country where the equipment is set up and

operated must be duly observed.

Work on the 230V mains system and EIB bus must

exclusively be performed by trained electrical

personnel. Laying and connection of the bus line as

well as application devices must be in conformity

with applicable guidelines specified in the EIB Manu-

al of the European Installation Bus Association (EIBA).

Never open the device for repairs or adjustments.

Please observe the „Mounting Instructions" with

regard to type of mounting and materials required.

If insulated wires of low-voltage leads (eg. bus lines)

and 230-V lines cross or approach each other, a

minimum clearance of 4 mm has to be arranged for

(see manual of Facility System T echnology of ZVEI/

ZVEH).

Make sure environmental conditions are adhered to

as called for by safety class and with respect to the

admissible operating temperature (see "Technical

Data").

The devices are to be programmed using ETS2

(version 1.1 or higher)