Axxera ARC600 Schnellstart-Handbuch - Seite 2
Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Dash Cameras Axxera ARC600 herunter. Axxera ARC600 2 Seiten.
Getting stated before use
• For safe and correct use of this product. you must read manual and understand before
the use of product.
• This is an advanced driver assistance system which examines the obstacles at rear of
vehicle and informs them to the drivers with the use of wide angle lens during parking
and stops.
• Please keep in mind that performance and design of this product may change for the
improvement in product's performance.
Product Installation
1.
After marking a hole as the mounting position of the camera, please drill the hole
(10mm) and install the rear camera to the hole.
Tip. The sealed guide sticker will be
a
useful tool to mark the mounting position.
2. Fix the camera with the sealed nut.
Tip. Please do not too tighten when adjusting the camera angle.
3. After connecting the RCA video signal terminal of the extension cable, connect to the
camera cable terminal.
Caution. Please spread out the cable as long as possible for installation.
4. After connecting the power cable to the extension cable. connect red(+) and
black(-)of the power cable to the reversing light.
Caution. Please check the voltage suitab/1/ty of the vehicle and this product and shut down
the power of the vehicle during installation
Please note electric leak during wiring work Installation.
5. After all the wiring work has been completed, check the camera operation.
Tip. When reinsta/1/ng the internal structure, Please pay attention to the cables.
6. After adjusting the camera angle to suit the driver's preference. tighten the nut.
Caution. The rear camera
Is
used as
a
supplementary aid when reversing.
Specification
DESCRIPTION
NTSC
Pick-up Device
1/3.7" Color Image Sensor
Number of image Pixels
682 (H) X
496
(V)
Output Image
Wide Viewing Angle and Mirror
Operating Voltage
DC12V ( 6V~ 20V )
Consumption Current
50mA
(Max),
at
DC
12V
LENS
Wide Viewing Angle163: F=1.9
Video Output
1.0Vp-p (75 ohm), Composite
Shutter Control
Electronic Auto IRIS (1/60,1/50-1/100,000)
Horizontal Resolution
450 TV Lines
Min. illumination
0.1 Lux
S/N Ratio
More Than
42dB
Operating Temperature
-30"C
~
+85"C
Storage Temperature
-4o·c -
+125"C
Material
Zinc
Cable Length
Camera 1 m, Extension 7m, Power 1.5m
NOTICE. Specifications suject to change without notice.
Trouble shooting
• Please check whether or not external materials are on the lens of camera installed
to the vehicle in case there is problem with the quality of image.
• Please check the product installation method in manual in case problem occurs during
the installation.
• Please check all connection of camera cable. power supply cable and video cable.
if no image in screen.
• Please check FUSE of power supply, if no image in screen.
One-Year Limited Warranty
This warranty gives you specific legal rights. You may also have other rights which
vary from state to state. Dual Electronics Corp. warrants this product to the original
purchaser to be free from defects in material and workmanship for a period of one
year from the date of the original purchase.Dual Electronics Corp.agrees.at our
option. during the warranty period, to repair any defect in material or workmanship
or to furnish an equal new. renewed or comparable product (whicheveris deemed
necessary)in exchangewithout charges.subject to verification of the defect or
malfunction and proof of the date of purchase.Subsequent replacement products are
warranted for the balanceof the original warranty period.
Who is covered?
This warranty is extendedto the original retail purchaser for
products purchased and used in the U.S.A.
What is covered?
This warranty covers all defects in material and workmanship
in this product. The following are not covered: installation/removal costs. damage
resulting from accident, misuse. abuse, neglect. product modification. improper
installation, incorrect line voltage.unauthorized repair or failure to follow instructions
suppliedwith the product. or damage occurring during return shipment of the
product.
What to do?
1.
Before you call for service.check the troubleshooting guide in yourowner's manual.
A slight adjustment of any custom controls may save you a service call.
2. If you require service during the warranty period. you must carefully pack the
product (preferably in the original package)and ship it by prepaid transportation
with a copyof the original receipt from the retailer to an authorized service center.
3. Please describe your problem in writing and include your name. a return UPS
shipping address (P.
0.
Box not acceptable).and a daytime phone number with
your shipment.
4. For more information and for the location of the nearest authorized service center
pleasecontact us toll-free at1-866-382-5476or byemail at [email protected]
Exclusion of Certain Damages:
This warranty is exclusive and in lieu of any
and all other warranties. expressedor implied. including without limitation the
implied warranties of merchantability and fitness for a particular purpose and any
obligation.liability.right, claim or remedyin contract or tort. whether or not arising
from the company's negligence. actual or imputed. No person or representative is
authorized to assume for the company any other liability in connection with the sale
of this product. In no event
shall
the company be liable for indirect. incidental or
consequential damages.
Duel Electronics
Corp.
Toll
Free: 1-866-382-5476
www.e~raaudio.com
©2014
Duel
Electronics
CQrp.
All rights reserved.
NSC0103-VD1
Printed In
KOREA