Axxess AX-ADFD01 Installationsanleitung Handbuch - Seite 2
Blättern Sie online oder laden Sie pdf Installationsanleitung Handbuch für Zubehör für Kraftfahrzeuge Axxess AX-ADFD01 herunter. Axxess AX-ADFD01 16 Seiten. Data interface for ford
Seite drucken
APPLICATIONS
FORD
Econoline *
2014-up
Econoline
2009-2013
Edge (with NAV)
2007-2010
Escape
2008-2012
Expedition
2007-2014
Explorer (with NAV)
2009-2010
Explorer Sport Trac (with NAV)
2009-2010
F-150 *
2009-2012
F-150 STX/FX2 base/XLT base
F-150 STX/XLT base
F-250/350/450/550 XL/XLT *
2013-2016
F-250/350/450/550 (with NAV)
2011-2012
F-650/750 *
2016-up
Focus
2008-2011
Fusion
2010-2012
Mustang
2009-2014
Taurus
2010-2012
* With AM/FM/CD radio
2
LINCOLN
MKX
MKZ
Navigator
MAZDA
Tribute
MERCURY
Mariner
Milan
2013
Mountaineer (with NAV)
2014
CONNECTIONS TO BE MADE
Attention! This interface will work with models that are either non-amplified, or amplified.
Please follow the instructions carefully for your model vehicle. Failure to do so will result in
2007-2010
either no sound, or low sound. If you are unsure if your vehicle is factory amplified or not, please
2007-2009
contact your local dealership.
2007-2014
For models without a Sony/THX amplifier:
From the 16-pin harness with stripped leads to the aftermarket radio (harness included with interface):
2008-2011
• Connect the Red wire to the accessory wire.
Note: If installing either an ASWC-1 or AX-LCD (both sold separately), connect the (2) Red
2008-2011
wires on the AX-ADFD01 harness as well.
2010-2011
• If the vehicle is equipped with a factory subwoofer, connect the Blue/White wire to the
2009-2010
amp turn on wire.
• If the aftermarket radio has an illumination wire, connect the Orange/White wire to it.
• If the aftermarket radio has a mute wire and the vehicle is equipped with SYNC, connect
the Brown wire to it. If the mute wire is not connected, the radio will turn off when SYNC
is activated.
• Connect the Gray wire to the right front positive speaker output.
• Connect the Gray/Black wire to the right front negative speaker output.
• Connect the White wire to the left front positive speaker output.
• Connect the White/Black wire to the left front negative speaker output.
Continued on the next page