Axxess AXDIS-FD3 Installationsanleitung Handbuch - Seite 7

Blättern Sie online oder laden Sie pdf Installationsanleitung Handbuch für Aufnahmegeräte Axxess AXDIS-FD3 herunter. Axxess AXDIS-FD3 16 Seiten.

Dual assignment instructions (long button press)

The AXDIS-FD3 has the capability to assign (2) functions to a single button, except

Volume-Up and Volume-Down. Follow the steps below to program the button(s) to

your liking.

Note: Seek-Up and Seek-Down come pre-programmed as Preset-Up and Preset-Down for

a long button press.

1. Turn on the ignition but do not start the vehicle.

2. Press and hold down the steering wheel control button that you want to assign a long

press function to for about (10) seconds, or until the L.E.D. flashes rapidly. At this point

release the button; the L.E.D. will then go solid.

3. Press and release the Volume-Up button the number of times corresponding to the

new button number selected. Refer to the Dual Assignment Legend. The L.E.D. will

flash rapidly while the Volume-Up button is being pressed, and then go back to a solid

L.E.D. once released. Go to the next step once the Volume-Up button has been pressed

the desired number of times.

Caution: If more than (10) seconds elapses between pressing the Volume-Up button, this

procedure will abort, and the L.E.D. will go out.

4. To store the long press button in memory, press the button that you assigned a long

press button to (the button held down in Step 2). The L.E.D. will now go off indicating

the new information has been stored.

Note: These steps must be repeated for each button you would like to assign a dual purpose

feature to. To reset a button back to its default state, repeat Step 1, and then press the Volume-

Down button. The L.E.D. will go out, and the long press mapping for that button will be erased.

STEERING WHEEL CONTROL SETTINGS

(CONT)

Dual assignment legend

1. Not allowed

2. Not allowed

3. Seek-Up/Next

4. Seek-Down/Prev

5. Mode/Source

6. ATT/Mute

7. Preset-Up

8. Preset-Down

9. Power

* Not applicable in this application

10. Band

11. Play/Enter

12. PTT

13. On-Hook

14. Off-Hook

15. Fan-Up *

16. Fan-Down *

17. Temp-Up *

18. Temp-Down *

REV. 2/15/23 INSTAXDIS-FD3