Axxess AXDIS-VL42 Installationsanleitung Handbuch - Seite 3

Blättern Sie online oder laden Sie pdf Installationsanleitung Handbuch für Aufnahmegeräte Axxess AXDIS-VL42 herunter. Axxess AXDIS-VL42 8 Seiten.

With the key in the off position:

• Locate the factory amplifier under the passenger seat.

• Extend the wire harness with the Gray and Green connectors

to this point.

• Unplug the connectors from the amplifier, then connect the

Gray and Green connectors to the harnesses unplugged from

the amplifier. (Figure A)

Note: The factory Green connector in the middle will not be

used in this application. It can left plugged in or unplugged.

• Connect the M.O.S.T. jumper harness to the factory fiber optic

cable from the amplifier.

• Locate the Green 10-pin connector behind the radio display.

(Figure B)

• Unplug the connector, then plug in the Green male 10-pin

connector from the AXDIS-VL42 harness into the radio display.

• Connect the factory male 10-pin connector, into the Green

female 10-pin connector from the AXDIS-VL42 harness.

Continued on the next page

INSTALLING THE AXDIS-VL42 INTERFACE

(Figure A)

(Figure B)

REV. 2/4/2020 INSTAXDIS-VL42