Axxess AXi-CANBOX1 Installationshandbuch - Seite 3
Blättern Sie online oder laden Sie pdf Installationshandbuch für Aufnahmegeräte Axxess AXi-CANBOX1 herunter. Axxess AXi-CANBOX1 11 Seiten.
Seite drucken
PRECAUTIONS:
Please read before you start the installation
Please study these instructions carefully before installing
AXXESS.i interface.
Many new vehicles use low-voltage or data-bus systems
that can be damaged by test lights and logic probes. Test
all circuits with a digital multi-meter before making
connections.
Do not disconnect the battery if the vehicle has an
anti-theft-coded radio, unless you have the radio code.
If installing an external push button switch, check with
the customer about where to install the switch.
To avoid accidental battery drainage turn off the interior
lights or remove the dome light fuse.
Roll down a window to avoid being locked out of the car.
Use of this product in a manner different to its intended
way of operation may result in property damage, personal
injury, or death.
Set Parking brake.
Remove the negative battery cable.
Protect fenders before starting.
Using protective blankets to cover front seats, interior of
the vehicle and center console.
Always install a fuse 6-12 inches away from AXXESS.i
interface, 5 amp fuse should be used.
Always secure AXXESS.i interface with Velcro or double
side tape to prevent rattling of the interface.
When securing AXXESS.i interface make sure that panels
can be closed back easily.
Use electrical tape on all you connections and splices, do
not leave any exposed connections.
Route all wires along factory harnesses, try not to drill or
make any unnecessary holes.
Make sure you are not connecting to any data wires;
always check your connections with a multi-meter.
Always use help of a professional installer to prevent any
damage to the vehicle or AXXESS.i interface.
3