Epson 3880 - Stylus Pro Color Inkjet Printer Netzwerk-Handbuch - Seite 30

Blättern Sie online oder laden Sie pdf Netzwerk-Handbuch für Drucker Epson 3880 - Stylus Pro Color Inkjet Printer herunter. Epson 3880 - Stylus Pro Color Inkjet Printer 39 Seiten. Printer
Auch für Epson 3880 - Stylus Pro Color Inkjet Printer: Broschüre (3 seiten), Spezifikationen (2 seiten), Broschüre & Specs (8 seiten), Hier beginnen (2 seiten), Start Here Handbuch (6 seiten), Eingeschränkte Garantie (12 seiten), Farbmanagement-Handbuch (47 seiten), Broschüre & Specs (8 seiten), Netzwerk-Handbuch (38 seiten), Schnellstart-Handbuch (2 seiten)

Note:

❏ The network administrator must check any changes made to the IP address

settings.

❏ When Auto is selected, DHCP becomes available. A DHCP server/router

must be available on your network.

❏ If Set Using Automatic Private IP Addressing (APIPA) is enabled, a private

IP address is automatically assigned to the network interface even when

there are no DHCP servers on your network.

❏ If the Dynamic DNS function is not supported, we recommend that you select

Manual and then enter an IP address. This is because if you select Auto, the

IP address of the network interface changes every time you turn on the printer

so that you need to change the printer port setting accordingly.

5. To assign an IP address manually, enter the IP address, the subnet mask,

and the default gateway. Be sure the IP address does not conflict with any

other devices on the network.

Note:

If there is a server or a router functioning as a gateway, enter the IP address of

the server or the router for the gateway address. If there is no gateway, leave the

default values.

6. If you want to get a private address between 169.254.1.1 and

169.254.254.254 automatically when an IP address cannot be obtained by

the DHCP server, leave the Set Using Automatic Private IP Addressing

(APIPA) setting set to Enable; otherwise, select Disable.

7. When setting an IP address using the ping command, select Enable for

Set Using PING. Select Disable when setting an IP address with

EpsonNet Config; this prevents any unexpected change of the IP address.

8. Select Enable for Acquire DNS Server Address Automatically if you

want to acquire the DNS server address using the DHCP server.

If you want to enter the DNS server address manually, select Disable and

then enter the IP address of the DNS server.

9. Select Enable for Acquire Host Name and Domain Name

Automatically if you want to acquire the host name and the domain name

using the DHCP server.

If you want to specify manually, enter the host name and the domain name

in the text boxes.

Network Software