Axxess AX-DSPX-HYKIA4 Einbauanleitung - Seite 3

Blättern Sie online oder laden Sie pdf Einbauanleitung für Automobilelektronik Axxess AX-DSPX-HYKIA4 herunter. Axxess AX-DSPX-HYKIA4 4 Seiten. Hyundai/kia data interface with amplifier bypass harness & dsp 2017-up

Seite drucken

1. Locate the factory amp, unplug all connectors, then remove the amp.

Note: Amp location is on the following page.

2. Install the AX-DSPX-HYKIA4 harness and make all necessary connections, but leave the

amp turn-on wire disconnected.

3. Plug the 16-pin and 20-pin connectors from the AX-DSPX-HYKIA4 harness into the

AX-DSPX-X.

4. Download and install the AX-DSP-X app from the Google Play Store or Apple App Store.

5. Open the app and follow the instructions on the Bluetooth Connection tab to pair the

mobile device to the AX-DSPX-X. (Figure A)

6. Scroll to the Configuration tab then select the vehicle type. Press the Lock Down button

to save the configuration. (Figure B)

7. Connect the amp turn-on wire from the AX-DSPX-HYKIA4 harness. Click the Identify

button to confirm that the AX-DSPX-HYKIA4 is connected properly. If so, a chime will be

heard from the front left speaker. Test all functions of the installation for proper operation.

Note: The outputs may need to be configured within the Outputs tab.

8. Adjust the DSP settings in the app as desired. Refer to the instructions under the Setup

Instructions tab, or online at

Axxessinterfaces.com

INSTALLATION

for an explanation of each tab in the app.

Continued on the next page

(Figure A)

(Figure B)

REV. 8/20/2019 INSTAX-DSPX-HYKIA4