Axxess AX-LR90102 Einbauanleitung - Seite 4

Blättern Sie online oder laden Sie pdf Einbauanleitung für Automobilelektronik Axxess AX-LR90102 herunter. Axxess AX-LR90102 4 Seiten. Land rover freelander 2 (with m.o.s.t. 25 amplifier) data interface with swc2006-2014

Seite drucken

PROGRAMMING THE ASWC-1 INTERFACE

L.E.D. feedback

The (18) Red L.E.D. flashes represent what brand radio the ASWC-1 believes it is connected to. Each flash represents a different

radio manufacturer. For example, if you are installing a JVC radio, the ASWC-1 will flash (5) times. Following is a legend that

dictates which manufacturer corresponds to which flash.

L.E.D. feedback legend

1 flash - Eclipse (Type 1) †

6 flashes - Pioneer / Jensen

2 flashes - Kenwood ‡

7 flashes - Alpine *

3 flashes - Clarion (Type 1) †

8 flashes - Visteon

4 flashes - Sony / Dual

9 flashes - Valor

5 flashes - JVC

10 flashes - Clarion (Type 2) †

* Note: If the ASWC-1 flashes Red (7) times, and you do not have an Alpine radio connected to it, that means the ASWC-1 does

not detect a radio connected it. Verify that the 3.5mm jack is connected to the correct steering wheel jack/wire in the radio.

** Note: Part number AX-SWC-PARROT is required (sold separately). Also, the Parrot radio must be updated to rev. 2.1.4 or

higher through www.parrot.com.

† Note: If you have a Clarion radio and the steering wheel controls do not work, change the radio type to the other Clarion radio type;

same for Eclipse. The following section explains how to do this.

‡ Note: If you have a Kenwood radio and the L.E.D. feedback comes back as showing as a JVC radio, change the radio type to a

Kenwood. The following section explains how to do this.

AxxessInterfaces.com

(CONT.)

11 flashes - Metra OE

16 flashes - Philips

12 flashes - Eclipse (Type 2) †

13 flashes - LG

17 flashes - TBD

14 flashes - Parrot **

15 flashes - XITE

18 flashes - JBL

AX-LR90102

I N S TA L L AT I O N I N S T R U C T I O N S

IMPORTANT

If you are having difficulties with the installation of this product,

please call our Tech Support line at 1-800-253-TECH. Before doing

so, look over the instructions a second time, and make sure the

installation was performed exactly as the instructions are stated.

Please have the vehicle apart and ready to perform troubleshooting

steps before calling.

NOWLEDGE IS

Enhance your installation and fabrication skills by

enrolling in the most recognized and respected

mobile electronics school in our industry.

Log onto www.installerinstitute.com or call

800-354-6782 for more information and take steps

toward a better tomorrow.

Metra recommends MECP

certified technicians

REV. 5/11/18 INSTAX-LR90102

OWER