Epson 850N Kurzanleitung - Seite 7

Blättern Sie online oder laden Sie pdf Kurzanleitung für Drucker Epson 850N herunter. Epson 850N 13 Seiten. Ink cartridge for use with epson stylus color printer
Auch für Epson 850N: Produkt-Informationsblatt (4 seiten)

Seite drucken

4. Hold down the

oad/eject button and press the

button. Hold down the buttons until the

starts to flash, then release them.

5. The printer prints a nozzle check pattern (shown on

page 11) and samples of fonts and colors.

6. To end the test, turn off the printer. Then reconnect the

interface cable and turn on your printer and computer.

Using Hex Dump Mode

You can use the printer's hex dump mode to identify problems

if you know how to interpret hex code. Follow these steps:

1. Make sure the printer is turned off and has paper loaded

in it.

2. Open the cover.

3. Hold down the

load/eject button and the

cleaning button and press the

prints Hex Dump Mode at the top of a page and then

stops.

4. Print one or more pages from an application as usual. The

printer prints the exact code it receives in hexadecimal

format.

5. Turn off the printer to exit hex dump mode.

Printing an Ethernet Card Status

Sheet

You can print a status sheet to see information about your

Ethernet card including the serial number, node address, and

network information. You need the status sheet information

to configure your card. Follow these steps:

1. Make sure the printer is turned on and has paper in the

feeder.

status sheet button

2. Press the status sheet button to print out the status sheet.

power

power light

color

power button. The printer

Installing Ink Cartridges for the

First Time

Always use the ink cartridges that came in the box the first

time you set up the printer. Follow these steps to install the

ink cartridges:

1. Make sure the printer is turned off (the

should be up). Then plug the printer's power cord into a

grounded outlet.

Caution:

Always use the

power button to turn the printer on or off. Never

use an external switch—such as a power strip switch—to turn off

the printer.

Don't use an outlet that can be turned off by a wall switch or timer,

or one that uses the same circuit as a large appliance. This may

disrupt the power, which can erase memory or even damage the

printer's power supply.

2. Open the ink cartridge packages that came with your

printer. Then remove only the yellow part of the tape seal

on the top of each one. Don't pull off the white portion or

try to remove the clear seal underneath the cartridge.

black cartridge

Caution:

Install the ink cartridges that came with the printer to ensure the

print heads charge correctly.

You must remove the yellow tape from the top of the cartridge or

you will permanently damage it. It's OK if the tape does not tear off

completely along its dotted line.

Warning:

If ink gets on your hands, wash them thoroughly with soap and

water. If ink gets into your eyes, flush them immediately with

water.

3. Press the

power button to turn on the printer. The

power light flashes and the

lights come on. The black ink cartridge holder moves into

loading position.

4/98

EPSON Stylus COLOR 850N

power button

Remove the yellow

tape seal, but

don't remove the

white portion

color cartridge

black and

color ink out

EPSON Stylus COLOR 850N

- 7