Axxess AX-ADVW01 Installationsanleitung Handbuch - Seite 3
Blättern Sie online oder laden Sie pdf Installationsanleitung Handbuch für Kabel und Anschlüsse Axxess AX-ADVW01 herunter. Axxess AX-ADVW01 8 Seiten. Volkswagen data interface 2002-2017
Seite drucken
Attention! The AX-ADVW01 will work with both the AX-ADBOX1 and AX-ADBOX2 interfaces,
but programming will be different. Refer to the proper page for whichever interface is being
used. Also note, the programming instructions for the AX-ADBOX2 reflect gen. 2. If installing a
gen. 1 AX-ADBOX2, refer to the AX-ADBOX1 programming instructions. Gen. 2 interfaces can be
distinguished by a blue reset button between the (2) connectors.
AX-ADBOX1
Installing the AX-ADVW01
With the key in the off position:
• Connect the 16-pin harness with stripped leads, and the AX-ADVW01 harness, into the
interface .
• Connect the AX-ADVW01 harness to the wiring harness in the vehicle.
• If an ASWC-1 (sold separately) will be used, do not connect it until the AX-ADVW01 is
programmed and fully functional.
INSTALLING & PROGRAMMING THE AX-ADVW01
Programming the AX-ADVW01
Attention! If the interface ever loses power, the following steps will need to be performed
again. Please ensure that the owner of the vehicle knows this.
• Turn the key (or push-to-start button) to the ignition position and wait until the radio comes
on.
Note: If the radio doesn't not come on within 60 seconds, turn the key to the off
position, disconnect the interface, check all connections, reconnect the interface, and
then try again.
• Turn the key (or push-to-start button) to the off position, then to the accessory
position. Test all functions of the installation for proper operation, before
reassembling the dash.
Continue to Adjusting the AX-ADVW01
REV. 6/21/2018 INSTAX-ADVW01
3